Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Air Ducts & Air Distribution / Backdraft Damper Vertical-Mount Intake
zhengfeng-BACKDRAFT-DAMPER-VERTICAL-INTAKE

Backdraft Damper Vertical-Mount Intake

A vertical gravity-blade assembly permits horizontal intake flow, with the flange and opening travel oriented toward the intended air path.
  • The intake flange establishes a clear mounting side.
  • Light blades provide passive operation for normal ventilation duty.
Request a Quote Browse Products

An intake-side flange with horizontal forward flow

The vertical-mount intake damper uses a galvanized frame and lightweight aluminum blades. Its flange seats on the incoming-air side of the opening. Horizontal forward airflow lifts the blades; gravity closes them as forward pressure disappears. It can serve a ventilation intake plenum where passive reduction of reverse flow is required.

The mounting plane is vertical, but the blade pivots must follow the specified orientation. A rotated or tilted installation may prevent gravity closure even when the flange fits. The inlet side, airflow arrow and blade opening envelope are therefore installation dimensions, not just labels.

Performance inputs to define

ItemSelection basis
MountingVertical frame, horizontal intake flow.
FlangeIntake side, with dimensions matched to the opening.
MaterialsGalvanized steel frame and aluminum blades.
Closing methodGravity, without an electrical command.
Duty dataActual-size opening pressure, pressure drop, velocity limit and reverse-pressure/leakage performance.

A low start-open pressure describes initial blade movement, not a fully open free area. Check the intake duty at the minimum fan speed and include the damper's pressure loss along with the louver, screen, filter and duct. The frame size alone cannot establish that the fan will pull the required air through the complete intake.

Intake installation and environmental exposure

Leave clear space behind the blades for their opening travel. Keep screws and adjoining components out of that space, support the frame squarely and seal the flange joint. A weather louver or screen may be needed as part of the intake design; the backdraft damper does not itself stop rain, insects or filtration contaminants.

Wind, dirt, icing and deposits can affect a light gravity mechanism. Provide access to inspect the pivots and closing edges. Do not add seals, springs or blade weights without checking their effect on opening and closure. A powered isolating damper may be more suitable if the system requires commanded shutoff independent of forward pressure.

Order and handover

Quote against the clear opening, flange overlap, wall depth, airflow direction, available pressure and required reverse leakage. Identify separate weather and filtering components. At handover, verify free blade travel, intake flow at the specified operating points and return to the seat when flow stops. Record any required reverse-pressure test. Gravity closure is not evidence of bubble-tight shutoff or fire/smoke compliance.

Planning your Backdraft Damper Vertical-Mount Intake specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Inquiry Form

Home

Products

News

About Us

Contact Us