Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Cleanroom Doors, Windows & Interlocks / Automatic Hermetic Sliding Door Opaque Stainless Single-Leaf
zhengfeng-AUTOMATIC-HERMETIC-SLIDING-DOOR-STAINLESS-SINGLE

Automatic Hermetic Sliding Door Opaque Stainless Single-Leaf

Stainless faces and reveal plates provide an opaque entrance whose lift, sliding and locking sequence must operate as one system.
  • Stainless leaf and reveal surfaces form a coordinated metal finish.
  • The solid blade removes the glazing interface from the door face.
  • Adjustable powered travel accommodates different passage timing needs.
Request a Quote Browse Products

A stainless entrance with controlled seal release

Stainless facings and matching reveal plates give this opaque powered slider a coordinated metal surface around the opening. It suits preparation and support rooms requiring visual privacy and a specified metal cleaning surface. The overhead belt translates the leaf only after the lifting actuator releases its wall and bottom gaskets. The two running wheels support the leaf; their condition and alignment affect both smooth travel and repeatable sealing.

Surface choice and travel settings

The stainless grade of the faces and reveal should be identified separately from the appearance of the brushed finish. Grade, cleaning chemistry, concentration and contact time determine suitability: stainless is not universally resistant to chlorides or every disinfectant. Protect the reveal-to-wall joints and avoid contaminating the surface with carbon-steel tools. Removing glazing simplifies the face but also removes the view of approaching traffic.

ItemSelection basis
Travel speedVariable, up to 0.7 m/s reference; the commissioned setting depends on leaf mass, detection coverage and approach conditions.
Hold-open interval0–60 seconds reference; a timer does not override a valid safety presence signal.
Supply120–240 V AC, 50/60 Hz, with final operator and accessory requirements scheduled together.
PerimeterRubber wall seal and flat floor gasket on a prepared sealing surface.

Coordinate the opening and lock

The header needs a supported fixing zone and accessible cover; the parking side must remain free of cabinets, pipes and protruding controls. Uneven floors can produce a local leak even when the operator reaches its closed position. A mechanical cylinder lock requires an operating procedure or suitable interlock to prevent the drive pulling against a locked leaf. Approach activation and presence protection have different functions.

Maintenance and purchasing checks

Inspect wheel wear, lift timing, belt condition and seal contact when travel becomes noisy or closure inconsistent. Do not compensate for a dragging gasket solely by raising drive force. Price the leaf, stainless reveal, grade and finish, mounting support, safety controls, lock integration and installation separately. Handover should demonstrate normal passage, manual release, locked-mode behavior and power-loss recovery. Specify a measured leakage limit at the required pressure for the whole assembly when the room needs a verified pressure boundary.

Planning your Automatic Hermetic Sliding Door Opaque Stainless Single-Leaf specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Inquiry Form

Home

Products

News

About Us

Contact Us