Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Air Ducts & Air Distribution / Antistatic Flexible Duct Hose DN50 Permanently Antistatic PU
zhengfeng-ANTISTATIC-FLEXIBLE-DUCT-HOSE-DN50

Antistatic Flexible Duct Hose DN50 Permanently Antistatic PU

A small smooth-lined pickup hose needs verified operating and electrical conditions.
  • Smooth inliner limits internal ledges where material can collect.
  • Small connection size suits localized extraction points.
Request a Quote Browse Products

A compact hose for local powder pickup

This DN50 polyurethane hose provides a flexible connection at a small extraction or material-handling point. A smooth inner passage reduces recesses where material can lodge, while the spring-steel helix supports the hose profile. The selection is useful where the pickup needs a planned offset, but particle size, feed rate and available conveying air determine whether a 50 mm bore is adequate.

Increasing air velocity can improve pickup under some conditions while also increasing pressure loss and particle impact on bends. A smooth bore does not prevent plugging by cohesive material or establish an abrasion life. The powder characteristics and route geometry belong in the selection.

What the antistatic requirement covers

The permanently antistatic designation calls for a documented material formulation and electrical test evidence for the supplied hose. Wall resistance and electrical continuity between metal end fittings are different measurements. A steel helix does not automatically provide a discharge path when its ends are insulated from the couplings.

Specify the required test method, measurement locations and acceptance limits for the process. ISO 8031 provides methods for hose resistance and end-fitting continuity; a result must be interpreted for the actual construction. For combustible powders, hose selection forms part of the overall ignition-control assessment, including the connected tools and equipment.

Route and connect the small assembly

The bore is the starting dimension; actual outside diameter, wall construction and end profile determine the coupling fit. Select the hose and fittings together for the operating pressure or suction, temperature and cleaning exposure. A pressure value at one temperature does not describe every service condition, and a minimum bend radius needs a clearly stated measuring reference.

Avoid turning sharply at the clamp or leaving the pickup weight on an unsupported hose end. Use the approved method to make any required electrical connections without damaging the liner. Inspect the bend regions for wear, the ends for loosening and the complete bonding path after replacement or reconnection.

Purchase an identifiable assembly

Quote the medium, particle size, flow conditions, installed length, movement and coupling details. Include electrical termination and testing in the scope where required. Acceptance should verify hose identity, dimensional fit, documented operating limits, tight connections and the agreed electrical measurements. Replace worn or cracked material before exposed reinforcement or leakage contaminates the process.

Planning your Antistatic Flexible Duct Hose DN50 Permanently Antistatic PU specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Inquiry Form

Home

Products

News

About Us

Contact Us