Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Air Ducts & Air Distribution / Antistatic Flexible Duct Hose DN150 Permanently Antistatic PU
zhengfeng-ANTISTATIC-FLEXIBLE-DUCT-HOSE-DN150

Antistatic Flexible Duct Hose DN150 Permanently Antistatic PU

A broad bulk-transfer hose needs a planned load path and a repeatable connection arrangement.
  • Broad smooth bore accommodates bulk transfer duty.
  • Heavy reinforced wall supports the larger hose section.
Request a Quote Browse Products

A large hose whose weight and route matter

The DN150 polyurethane hose provides a broad smooth passage for bulk-transfer or large extraction connections. Its steel helix supports the wall, while the liner forms the material-contact surface. Selecting a large bore can reduce air velocity for a given volumetric flow, which may help some pressure-loss constraints but can also leave a solids-conveying stream below the velocity needed to keep material moving.

Match the bore to the powder or granules, loading and conveying method. High throughput is a system result, not a capacity established by a 150 mm diameter. The length, bends and transitions affect both transport behaviour and wear.

Design the supported assembly

A large reinforced hose imposes meaningful loads on its couplings and equipment outlets. Use the actual hose-and-fitting weight, including material retained during operation, to arrange support. Allow a broad curve with straight end engagement and enough clearance for the full movement envelope. Dragging the assembly across a floor or using the hose to pull mobile equipment adds loads that a pressure rating does not cover.

The selected construction needs its own bend-radius reference, pressure and vacuum limits and temperature conditions. Smaller-diameter data cannot establish the capability of this size. A mobile connection also needs a defined method of parking and reconnection so that its end is not contaminated and its route is not kinked.

Antistatic performance at every reconnection

The permanent antistatic material requirement must be supported by appropriate resistance data. The assembled metal parts and helix need the specified electrical path to the installation earth; continuity can be lost through an incompatible coupling, contamination or a damaged termination. Electrical acceptance should distinguish wall resistance from end-to-end continuity, using the relevant test method for the actual hose construction.

For combustible material, assess the entire transfer arrangement and its ignition controls. Neither an antistatic label nor an embedded wire by itself establishes suitability for every powder or hazardous location.

Order scope and service checks

Provide conveying conditions, media, temperature, route dimensions and equipment movement. Quote the hose, compatible ends, supports, protective arrangements and required electrical testing as a defined assembly. Acceptance should verify the delivered identity and ratings, fit, leak integrity and required electrical measurements. Inspect high-wear bends and support contact areas during service, and replace damaged sections before the liner or reinforcement can enter the conveyed product.

Planning your Antistatic Flexible Duct Hose DN150 Permanently Antistatic PU specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Inquiry Form

Home

Products

News

About Us

Contact Us