Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Air Ducts & Air Distribution / Antistatic Flexible Duct Hose DN100 Permanently Antistatic PU
zhengfeng-ANTISTATIC-FLEXIBLE-DUCT-HOSE-DN100

Antistatic Flexible Duct Hose DN100 Permanently Antistatic PU

A medium machine connection must preserve its route and electrical path throughout the defined movement.
  • Larger bore suits mixer and packaging-machine connections.
  • Wire helix supports the hose profile.
Request a Quote Browse Products

A process-machine connection with controlled movement

The DN100 smooth-lined PU hose connects extraction or transfer equipment where a rigid pipe would not accommodate the required installation offset. Its reinforced wall maintains the passage while the smooth liner limits internal pockets. A mixer, granulator or packaging machine may also move during operation or maintenance; that movement must be defined separately from a fixed installed bend.

Check the whole operating cycle

Specify normal conveying conditions, suction peaks, start-stop events and cleaning exposure. The spring-wire construction supports the shape, but pressure resistance, vacuum resistance and repeated flexing performance are separate properties. Use data for the actual diameter and construction at the relevant temperature. The hose should retain the required curvature throughout equipment travel without twisting or being pulled taut.

Allow suitable straight engagement at the ends and avoid a sharp turn immediately beside a fitting. The outside dimensions and coupling system need to match the selected hose, rather than treating every nominal 100 mm hose as identical. Supports should carry the assembly without making a pinch point or an unintended restraint on machine movement.

Electrical and material compatibility

The antistatic requirement concerns the actual inner and outer materials, their test conditions and the assembled discharge path. A surface-resistance result alone does not show continuity through two fitted metal couplings. Specify both the material evidence and the assembly measurements needed for the application, with a defined method such as the relevant ISO 8031 test.

Where powders create an ignition hazard, assess the hose together with the machine, fittings and earthing arrangement. The product designation is not a complete hazardous-area approval. For product-contact or cleaning-intensive service, require evidence for the actual liner and cleaning chemicals; polyurethane and a smooth bore do not automatically establish food-contact suitability or sanitising compatibility.

Maintenance and quotation details

Inspect the areas flexing during each cycle, the liner at bends and the end attachments. Record wear and recheck required electrical continuity after disturbing the connection. A suction leak may reduce capture even when little powder escapes outward.

Provide the equipment interface drawing, movement envelope, powder characteristics, installed length and operating limits for quotation. Identify hose, couplings, supports, bonding provisions and test documentation. Acceptance should include dimensional fit, route inspection through the defined movement, leak integrity and the specified electrical evidence.

Planning your Antistatic Flexible Duct Hose DN100 Permanently Antistatic PU specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Inquiry Form

Home

Products

News

About Us

Contact Us