Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Cleanroom Wall & Ceiling Systems / Aluminum Honeycomb Cleanroom Sandwich Panel 50 mm Steel-Faced
zhengfeng-ALUMINUM-HONEYCOMB-CLEANROOM-SANDWICH-PANEL-50-STEEL

Aluminum Honeycomb Cleanroom Sandwich Panel 50 mm Steel-Faced

Thin steel skins and a metal cellular core work as a bonded sandwich with planned local reinforcement.
  • Metal cells contain no mineral fibers.
  • Four-sided extrusion keeps the perimeter defined.
Request a Quote Browse Products

Steel-faced honeycomb for a thin modular wall

This 50 mm panel uses an aluminum-honeycomb core between coated steel skins, with an aluminum perimeter frame. The cellular core separates and supports the faces while avoiding a mineral-wool infill. It is a construction to consider for controlled assembly areas needing a compact modular boundary with enclosed edges.

How the sandwich carries load

The skins and core work together through their adhesive bonds. Core cell geometry, foil thickness and direction affect the result, while a locally crushed cell or detached face interrupts that load transfer. A metal honeycomb therefore does not make the panel a solid metal plate, and a screw through a thin skin cannot be assumed to carry a concentrated equipment load.

The reference specification identifies a 3003 aluminum core, 0.5 mm steel faces and a 6063 aluminum box frame. The finished overall thickness is 50 mm. Agree an actual section drawing that includes adhesive layers, face tolerances and frame fit rather than calculating a guaranteed core thickness by subtraction. Surface coating, steel substrate protection and frame treatment also need separate descriptions.

Design openings before manufacture

Provide local reinforcement or a structural connection for dispensers, shelves and mounted instruments. Door and window cut-outs remove the continuous sandwich and need a defined perimeter load path. Plan support spacing from the completed panel and its pressure loading; a possible manufacturing length does not establish unsupported wall height.

Flush room-side joints still need compatible seals and carefully closed cut edges. The absence of a mineral-fibre core does not prove low emissions, antistatic performance or a complete cleanroom classification. Adhesives, coatings, sealants and the installed room all affect those requirements. Where electrical bonding is required, specify and test the intended continuity path instead of relying on incidental contact between coated components.

Handling, maintenance and acceptance

Support the panel during lifting and prevent concentrated loads from crushing its face or edge. Inspect dents, loose skins and opened seams after impacts. A cosmetic repair should follow an assessment of the bond and core beneath the damage.

A comparable quotation includes wall geometry, finish, honeycomb and adhesive specification, reinforcement, frames, trims and installation. Acceptance should identify materials, verify section dimensions and flatness, and confirm the approved support and opening details. Fire behaviour and allowable loading require evidence for the assembled panel, including its organic bonding and finish materials.

Planning your Aluminum Honeycomb Cleanroom Sandwich Panel 50 mm Steel-Faced specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Inquiry Form

Home

Products

News

About Us

Contact Us