Aluminum Cleanroom Door 800 mm Solid Aluminum-Faced
- An opaque blade keeps adjacent service spaces out of view.
- Aluminum face sheets distinguish the leaf from steel-faced alternatives.
- The compact clear width reduces the required door opening.
A compact opaque aluminum-faced entrance
This manual hinged door uses 1.2 mm prepainted aluminum faces around polystyrene infill, with an extruded aluminum perimeter supporting the edges. The selected 800 mm clear-width format suits compact service-room layouts where the access requirement fits that passage. An opaque leaf screens the room, but approaching users cannot see through it before opening.
Choose this format after checking the actual use: a person carrying a tray, wearing protective clothing or maneuvering an aid may need different clearance from an unencumbered person. Applicable access and escape requirements are established for the project. The 800 mm selection should not be assumed to satisfy every route or local requirement.
Dimensions and material choices
| Parameter | Listed reference |
|---|---|
| Clear width | 800 mm, to be achieved at the agreed operating angle with installed hardware. |
| Published height | 2125 mm; establish whether the final drawing dimension denotes leaf, frame or clear opening. |
| Faces | 1.2 mm prepainted aluminum sheet. |
| Infill | Polystyrene, enclosed in the leaf. |
| Perimeter | 2 mm extruded aluminum profile, with assembled corners. |
| Options | Left/right handing, compatible handle and closer. |
Aluminum facing is a specific material choice and is distinct from a steel leaf installed in an aluminum frame. The sandwich structure helps support broad skins, while hinge and lock loads need deliberate reinforcement. The polystyrene infill does not establish a fire rating or whole-door thermal value.
Opening layout and installation
The leaf needs a swing arc and approach space even when the wall opening is narrow. Place handles and stops to avoid collisions with nearby equipment. Schedule any threshold, perimeter seal or bottom seal explicitly; none is defined merely by the prepainted finish. Tightening the gap to control air movement can create scraping if the floor is uneven or the frame is out of square.
Support the hinge jamb within the wall and maintain alignment of the assembled profile corners. Use compatible fasteners and junction details where aluminum meets other metals. A closer must be selected for the actual leaf and room-pressure conditions, with a proper mounting plate where needed.
Cleaning, quotation and acceptance
Protect the coating from abrasive tools and incompatible chemicals. Inspect exposed corners, lower edges and seals for damage or liquid entry; touch-up work should follow the selected finish system. If frequent impact or a wider cart route is expected, reassess the door size and protective construction.
For pricing, include the required finished clear dimensions, partition section, coating color, hardware, seals and installation. At handover measure the usable passage, check swing clearance and opaque-door traffic arrangements, and demonstrate reliable opening and closing. Document the finish and hardware supplied so later repairs use compatible components.
Planning your Aluminum Cleanroom Door 800 mm Solid Aluminum-Faced specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.