Aluminum Cleanroom Door 1200 mm Straight-Vision Aluminum-Faced
- A broad clear passage remains within a single-leaf arrangement.
- The compact straight light preserves more metal surface than half glazing.
- Metallic infill and perimeter construction create an aluminum-based blade structure.
A broad hinged passage with limited glazing
This aluminum-faced door uses a 1200 mm clear-width selection and a compact straight rectangular light. Corrugated aluminum infill supports the prepainted skins within an extruded perimeter. The limited glazing leaves a broad opaque area, useful where the passage must be wide but observation through the door can remain localized.
A wide single leaf offers one continuous passage without a meeting stile, but its swing arc extends farther into the room or corridor. Review the approach of the largest trolley or instrument, not just its width at the opening. A sliding or paired-door arrangement may be more practical if the swing interferes with work areas.
Construction and load decisions
| Item | Listed reference and selection consequence |
|---|---|
| Clear width | 1200 mm; final passage measured with hardware and opening angle accounted for. |
| Published height | 2125 mm; drawing to identify leaf, frame and clear-height dimensions separately. |
| Face sheets | 1.2 mm prepainted aluminum. |
| Infill | Corrugated aluminum, distinct from a cellular honeycomb core. |
| Perimeter | 2 mm extruded aluminum profile with dedicated hardware support details. |
| Glazing | Straight rectangular observation light; safety glass, size and elevation to specification. |
| Operation | Manual single-leaf hinge; handing, closer and lever options. |
Corrugation and its bond to the faces help the sandwich resist deformation. Corrugation direction, connections and edge support matter, so material thickness alone is not a rated load or stiffness statement. The core does not make the door fire rated or thermally insulated to a particular value.
Why width affects the hardware
A broad leaf places its mass farther from the hinge line and exposes more area to room pressure. Its hinges, backing and closer therefore need selection for width, mass, mounting geometry and pressure conditions. Selecting a closer solely from the apparent weight of aluminum can leave the door unable to latch reliably. Increasing spring force without considering users can make opening unnecessarily difficult.
Provide a suitable stop to control opening and protect the frame and glazing; the closer's damping function should not be assumed to replace it. Check the wall reinforcement and anchor spacing before installation. Coordinate the lower edge and any seals with floor flatness to avoid long-edge rubbing.
Maintenance and purchase checks
Watch for hinge-jamb movement, changing diagonal gaps, loose corner joints or rubbing at the latch end. These can indicate support or alignment problems rather than a simple closer adjustment. Inspect the small vision light and its seals, and repair damaged coating with a compatible procedure.
Price the leaf, frame, glass, strengthened hardware support, closer, seals, installation and any access-control preparation separately. Acceptance includes actual clear width and height, full swing clearance, stable anchorage and repeated controlled operation under normal ventilation. Use a representative equipment movement check where large transfers are the reason for choosing this width.
Planning your Aluminum Cleanroom Door 1200 mm Straight-Vision Aluminum-Faced specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.