Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Cleanroom Flooring / Aluminum Cleanroom Cove Base 75 mm Large-Radius
zhengfeng-ALUMINUM-CLEANROOM-COVE-BASE-R75

Aluminum Cleanroom Cove Base 75 mm Large-Radius

A broad extruded cover and separate clip form an accessible wall or ceiling transition.
  • Nominal three-inch radius
  • Extruded aluminum cover
  • Two-piece clip assembly
Request a Quote Browse Products

A broad curve where the room has enough clearance

This two-piece extruded aluminium cove uses a separate mounting clip and a large curved cover. The nominal three-inch radius is 76.2 mm, commonly described as approximately 75 mm. Use the supplied section dimensions for interfaces rather than treating those two nominal designations as exactly interchangeable.

The broad curve gives wiping tools a gentler change of direction at wall-to-wall and wall-to-ceiling junctions. It also projects farther across the adjoining surfaces than compact coving. The advantage is useful only where the installed profile remains accessible around services and equipment.

Survey the retrofit junction

Mark the full cover, clip and accessory envelope before fixing. Check door swings, ceiling lights, sockets, pipework and any removable panels. A larger face can cover an awkward corner visually, but it cannot provide a sound attachment to a loose or damaged substrate.

Position the clip on a suitable enclosure surface and use the intended engagement method for the cover. Straight runs, end closures and welded three-way intersections must share the same profile geometry. A component from a smaller-radius system will not necessarily close the broad cove correctly.

Wall and ceiling coving is not a universal floor base

For wall and ceiling junctions, plan sealed edges and transitions with the panel system. If the project also requires a floor-to-wall cove, select a base detail that integrates with the actual epoxy or resilient floor finish. A perimeter base may need a recessed track or a supported floor return rather than the same surface-mounted ceiling profile.

Leave drainage routes and equipment access unobstructed. Identify any panel movement or maintenance removal that crosses the cove, and provide a detail that can be resealed after access. The clip connection alone does not establish the leakage performance of the enclosure.

Buying, maintaining and inspecting

Provide a junction plan with run lengths, mounting surfaces, finish, three-way intersections and termination positions. The quote should include clips, corners, closures, cutting, fixings and sealing, together with access equipment for high-level work.

Assess a sample using the actual wiping tool and cleaning agent. Inspect completed work for secure engagement, smooth aligned joints, closed ends and accessible seals. Replace damaged coating or failed seal details as required. A large radius supports cleaning access but does not remove the need for a defined cleaning procedure.

Planning your Aluminum Cleanroom Cove Base 75 mm Large-Radius specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Inquiry Form

Home

Products

News

About Us

Contact Us