Aluminum Air Duct 600 x 300 mm 1.0 mm
- Wide shallow opening uses ceiling height efficiently.
- Increased sheet depth supports the broader panel span.
Use a wider passage where ceiling height is limited
The 600 × 300 mm aluminum duct provides a two-to-one rectangular passage with nominal 1.0 mm 3003-H14 sheet. It offers a lower-mass material choice for medium distribution branches. Its broad flat faces make stiffness and joint design important even when the duct carries ordinary dry ventilation air.
Choose reinforcement with access and air cleanliness in mind
Increasing sheet thickness can improve panel stiffness, but it does not determine the complete pressure duty. Section length, stiffener spacing, flange rigidity and support conditions also affect deformation. Positive pressure pushes faces outward; suction can cause a different instability. Select the construction for both relevant operating states.
| Reference arrangement | Decision |
|---|---|
| 600 × 300 mm clear passage | Dimension fittings and transitions to preserve the intended airway. |
| Nominal 1.0 mm 3003-H14 | Verify decimal thickness tolerance and material suitability for fabrication and service. |
| External angles or internal tie options | Engineer reinforcement and its attachments rather than transferring steel details directly. |
| Pittsburgh seams and TDC-style ends | Identify the actual connector profile, fasteners, corner treatment and sealing system. |
External stiffeners leave the airway less obstructed but increase the outside envelope and complicate insulation continuity. Internal members can affect cleaning access, local airflow and sealing at penetrations. If internal cleanliness matters, weigh those consequences before choosing a tie arrangement. Neither option is a verified structural design merely because it appears in an accessory list.
Installation and maintenance interfaces
Coordinate flange access and stiffeners with supports before fabrication. Align sections without drawing distorted flanges together with bolts. Use compatible mixed-metal details where dampness could promote galvanic attack, and protect the thin faces during handling.
Specify insulation separately for thermal or condensation control. Reinforcement and hangers create details where the vapour barrier can be interrupted. During service, look for loose joints, panel movement, damaged sealant and moisture around supports. Choose cleaning methods that do not attack the aluminum or loosen the seam seal.
Quote a construction schedule
Send duct dimensions, lengths, pressure duty, reinforcement constraints and required leakage criterion. Include matching fittings, connector components, supports and any insulation in the stated scope. Acceptance should compare the fabricated assembly with its approved construction schedule and verify dimensions, joint sealing and the agreed installed leakage performance.
Planning your Aluminum Air Duct 600 x 300 mm 1.0 mm specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.