Adjustable Louver Air Grille 900 x 600 mm Close-Spaced Double-Deflection
- Close blade pitch creates a finely divided discharge face.
- Large 3:2 frame suits broad rectangular openings.
A large double-deflection grille with closer blade spacing
The 900 × 600 mm close-spaced grille combines a large supply opening with two perpendicular banks of adjustable aluminum blades. Its 12.7 mm reference pitch gives a denser blade pattern than a 19.05 mm arrangement. This changes the core geometry; it does not by itself prove greater free area, lower sound or better room coverage.
Use effective area and selected performance
The nominal rectangle measures 0.54 m². Blade thickness, profile, frame and settings reduce the effective passage, so nominal area should not be used as the tested airflow coefficient. At the same face dimensions, a close-spaced core can have different resistance and throw from a wider-spaced core.
The two blade banks permit direction adjustment in two planes. Large deflection angles alter both the discharge pattern and pressure loss. An optional aluminum opposed-blade damper provides a separate means of balancing; it must be included in the performance selection and in the required fitting depth.
Large-face installation details
| Item | Practical requirement |
|---|---|
| Frame and fixings | Support the full border without bowing it, using the supplied mounting detail. |
| Duct or plenum approach | Distribute flow across the broad face instead of feeding only one corner. |
| Service access | Reach both blade banks, the damper and fixings without removing permanent equipment. |
| Finish | Specify the white or alternative finish for the room and cleaning agents. |
The 900 × 600 mm designation is not the wall cut-out or outside border size. Coordinate all three dimensions and the connection depth before fabrication. A short transition or nearby bend can create uneven velocities across this broad opening, even when the total measured branch flow is correct.
Keep distribution settings reproducible
Choose airflow, supply temperature, mounting height and blade angles together to meet the required room pattern. A broad outlet may still create drafts or short-circuit to extraction if positioned poorly. The closer blades are not a particle filter and do not establish cleanroom performance.
Record final blade positions and balanced flow during commissioning. Cleaning should remove deposits without bending the close-spaced blades; inspect for unintended movement afterward. The quote should identify the complete core, border, damper, mounting, design pressure and sound/throw evidence for the selected configuration. Acceptance should include uniformity of discharge and the practical ability to maintain the installed fitting.
Planning your Adjustable Louver Air Grille 900 x 600 mm Close-Spaced Double-Deflection specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.