Adjustable Disc Air Valve DN200 Exhaust
- Large circular neck accommodates a broader extract path.
- Bayonet attachment permits removal of the valve body.
A large circular extract connection with local adjustment
The DN200 disc valve keeps a 200 mm nominal branch connection at the room terminal. Its larger centre disc creates an adjustable annular intake within a reference 245 mm outside face. It suits assessment for larger support or utility-room extract points where a compact round terminal is preferred.
Neck size does not establish terminal capacity
The disc, rim and opening determine the final flow passage. A DN200 connection therefore does not demonstrate the airflow of an unobstructed 200 mm duct. Select the valve from required flow, available pressure, opening position and acceptable sound, including any nearby bend or transition.
A single larger extract point can be convenient, but it does not ensure adequate collection throughout a large room. Obstructions and supply-air placement may leave poorly swept areas. Several appropriately located terminals or a different collection arrangement may be preferable when the process or layout demands distributed extraction.
Coordinate support and access
| Component | Reference detail |
|---|---|
| Valve body | Galvanized sheet steel with white painted finish referenced to RAL 9010. |
| Disc | Threaded manual adjustment of the annular opening. |
| Mounting | Matching bayonet socket for the selected wall or ceiling construction. |
| Outside face | 245 mm reference diameter, distinct from socket and opening dimensions. |
Provide a secure mounting frame and sufficient space for the whole body to be removed. Ceiling installation needs reliable engagement without relying on the decorative face to support the duct. Seal the duct and frame interface to keep extraction on the intended room path.
Commission and maintain the opening
Set the disc using measured flow and the instructions for the actual assembly. Do not assume linear airflow per turn or substitute another valve’s coefficient. Excessive throttling can increase local noise; resolve the branch balance where the selected opening is unsuitable.
Record the setting before cleaning. Release the body using its mounting method, protect the coating and avoid bending the broad disc. Refit securely and restore the opening, checking flow after changes that affect the passage or branch.
Specify airflow, pressure, sound, location, socket and service access for pricing. Acceptance should cover measured duty and the room air balance. A manually adjustable extract valve does not provide automatic isolation, emergency smoke control or suitability for corrosive process exhaust without a separate documented selection.
Planning your Adjustable Disc Air Valve DN200 Exhaust specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.