Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Air Ducts & Air Distribution / Adjustable Disc Air Valve DN125 Exhaust
zhengfeng-ADJUSTABLE-DISC-AIR-VALVE-DN125

Adjustable Disc Air Valve DN125 Exhaust

coordinate shared-branch balancing, room pressure, correct measurement coefficients and accessible maintenance.
  • Medium neck suits common circular branch sizes.
  • Smooth painted face remains accessible for wiping.
Request a Quote Browse Products

A DN125 outlet balanced within a shared extract system

The DN125 disc valve connects a 125 mm extract branch to a manually adjustable annular room opening. Its threaded centre element moves as it turns, allowing the passage to be set from the room side. A 160 mm outside face is the reference visible envelope, subject to the selected socket and construction drawing.

Balance the branch without losing the room relationship

In a gowning or support area, extract flow interacts with supply air and transfer through doors or grilles. Opening this valve farther may increase local extraction but also change the pressure relationship with the next room. The required setting should come from the room air-balance schedule, not simply from matching the duct diameter.

Several valves on a common fan share the available pressure. Adjusting one can affect the others, so commissioning needs a coordinated balancing sequence. The disc remains at a fixed position afterward; it does not compensate automatically when fan speed, filter loading or other branches change.

Measure using the installed arrangement

Pressure-based flow measurement uses a coefficient associated with the selected model and opening. A bend or tee immediately behind the valve can affect the appropriate method or coefficient. Use the supplied measurement instructions or a suitable direct-flow method rather than borrowing another model’s calibration.

Selection detailPractical consequence
DN125 neckMatch the branch and socket, with actual insertion dimensions checked.
Painted galvanized-steel bodySpecify finish and cleaning compatibility; white is referenced to RAL 9010.
Bayonet attachmentProvide the matching frame, seal and positive engagement.
Wall or ceiling locationAllow measurement and removal access after room equipment is installed.

Keep adjustment reproducible

A smooth visible face is only part of the cleaning task. Dust also collects at the annular passage and behind the disc. Remove and clean by the selected procedure without changing the recorded opening, and inspect coating damage where cleaning exposes metal. Secure the body after refitting.

The offer should state design airflow, pressure and sound at the proposed opening, plus mounting components and commissioning scope. Handover should document flow, setting and room-pressure checks with doors in the agreed position. This general extract terminal is not a local fume-capture hood or a certified cleanroom barrier.

Planning your Adjustable Disc Air Valve DN125 Exhaust specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Inquiry Form

Home

Products

News

About Us

Contact Us