STJH WB012 waterborne epoxy floor-seal sample with a very thin coloured film at its cut edge on white

STJH-THIN-FILM-EPOXY-FLOOR-COATING-WB012

Thin-Film Epoxy Floor Coating 0.12 mm Waterborne Hygienic Seal

A very thin waterborne epoxy seal for pedestrian floors where adding height or a heavy screed is unnecessary.

Approximately 0.12 mm dry film
Two diluted waterborne epoxy coats
Minimal increase in floor height

Permintaan sebut harga Semak imbas produk

About This Product

WB012 is a two-coat water-based epoxy sealing construction with a total dry film of approximately 0.12 mm. It follows the prepared substrate closely, so the finished appearance depends on the concrete beneath it. The coats use different dilution and coverage rates rather than building a thick self-leveling resin body. This model is selected for light traffic and a washable coloured surface.

Ciri-ciri Utama

Light-duty surface sealing

The coating closes the exposed floor face for routine cleaning without consuming the depth needed by a resin screed.

Substrate-following finish

Existing falls are preserved, although scratches, patches and rough preparation can remain visible through the thin coating.

Low-odour application route

Water-based chemistry suits enclosed refurbishment work when ventilation and drying conditions are managed throughout the coating sequence.

Parameter teknikal

Binder Type	Water-based epoxy
Total Dry Film	Approximately 0.12 mm
Coat Count	Two
First-Coat Consumption	Approximately 0.15 kg/m²
Second-Coat Consumption	Approximately 0.10 kg/m²
Kemasan permukaan	Smooth gloss
Traffic Category	Pedestrian and light traffic
Substrate	Prepared sound floor base
Construction Type	Thin hygienic floor seal
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Applications

Suitable for clean storerooms, pedestrian support rooms and light industrial utility spaces. Specify a thicker wearing system for concentrated wheel loads or damaged concrete. The very thin seal is a practical option when the original floor already has acceptable flatness and surface integrity.

Solutions for Your Application

The buyer expects a thin seal to hide rough concrete.

Smooth and repair the substrate first, or select a levelling system when correction is extensive.

Cool or humid conditions delay drying between coats.

Provide ventilation and allow each coat to reach the proper condition before the following application.

Pilihan yang boleh didapati

Choose a solid colour from the usual industrial palette and define the perimeter treatment. Maintain the light-traffic duty and dry-film specification rather than comparing this seal directly with high-build coating thickness.

Planning a Thin-Film Epoxy Floor Coating 0.12 mm Waterborne Hygienic Seal specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami