Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Light-duty surface sealing
The coating closes the exposed floor face for routine cleaning without consuming the depth needed by a resin screed.
STJH-THIN-FILM-EPOXY-FLOOR-COATING-WB012
Thin-Film Epoxy Floor Coating 0.12 mm Waterborne Hygienic Seal
A very thin waterborne epoxy seal for pedestrian floors where adding height or a heavy screed is unnecessary.
- Approximately 0.12 mm dry film
- Two diluted waterborne epoxy coats
- Minimal increase in floor height
About This Product
WB012 is a two-coat water-based epoxy sealing construction with a total dry film of approximately 0.12 mm. It follows the prepared substrate closely, so the finished appearance depends on the concrete beneath it. The coats use different dilution and coverage rates rather than building a thick self-leveling resin body. This model is selected for light traffic and a washable coloured surface.
Key Features
Substrate-following finish
Existing falls are preserved, although scratches, patches and rough preparation can remain visible through the thin coating.
Low-odour application route
Water-based chemistry suits enclosed refurbishment work when ventilation and drying conditions are managed throughout the coating sequence.
Technische Parameter
| Binder Type | Water-based epoxy |
|---|---|
| Total Dry Film | Approximately 0.12 mm |
| Coat Count | Two |
| First-Coat Consumption | Approximately 0.15 kg/m² |
| Second-Coat Consumption | Approximately 0.10 kg/m² |
| Oberfläche Finish | Smooth gloss |
| Traffic Category | Pedestrian and light traffic |
| Substrate | Prepared sound floor base |
| Construction Type | Thin hygienic floor seal |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Applications
Suitable for clean storerooms, pedestrian support rooms and light industrial utility spaces. Specify a thicker wearing system for concentrated wheel loads or damaged concrete. The very thin seal is a practical option when the original floor already has acceptable flatness and surface integrity.
Solutions for Your Application
The buyer expects a thin seal to hide rough concrete.
Smooth and repair the substrate first, or select a levelling system when correction is extensive.
Cool or humid conditions delay drying between coats.
Provide ventilation and allow each coat to reach the proper condition before the following application.
Verfügbare Optionen
Choose a solid colour from the usual industrial palette and define the perimeter treatment. Maintain the light-traffic duty and dry-film specification rather than comparing this seal directly with high-build coating thickness.
Planning a Thin-Film Epoxy Floor Coating 0.12 mm Waterborne Hygienic Seal specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
