STJH high-open die-cast aluminum cleanroom floor panel with deep 62 mm structure and complete open-grid face on white

STJH-DIE-CAST-ALUMINUM-RAISED-ACCESS-FLOOR-HV53

Die-Cast Aluminum Raised Access Floor 53% Open-Area

A deep high-open aluminum module for cleanroom zones requiring a large recirculation cross-section.

More than 53% free cross-section
62 mm die-cast panel body
High-volume recirculation geometry

Permintaan sebut harga Semak imbas produk

About This Product

The HV53 panel provides more than 53% free cross-section within a 600 x 600 mm grid. Its 62 mm die-cast aluminum body uses an orthotropic structure to support the open face. This configuration is selected when high ventilation opening area is required, rather than trying to enlarge holes in a lower-open-area panel that was designed for a different structural arrangement.

Ciri-ciri Utama

Large open face

The generous ventilation area gives air a broad route through the floor. Actual airflow still depends on the room pressure field and the space below the panel.

Purpose-made deep structure

The 62 mm body accommodates its cast load-bearing geometry around the openings, separating this configuration from thinner panels with lightly modified perforation patterns.

Accessible recirculation path

The removable module permits inspection and cleaning beneath high-flow areas, where cable arrangements or later equipment changes might obstruct the intended return route.

Parameter teknikal

Pedestal Grid	600 x 600 mm
Ketebalan Panel	62 mm
Panel Material	Die-cast aluminum
Structure	Orthotropic ventilation body
Free Cross-Section	> 53%
Reference System Weight	Approximately 31 kg/m²
Pedestal Height Range	50–2,000 mm
Surface Selection	Suitable conductive or non-conductive finish
Floor Function	High-volume cleanroom recirculation
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Applications

Suitable for semiconductor and precision technical zones needing substantial vertical recirculation through the floor. Select the installed support and finish with the intended equipment loading and cleaning regime. Avoid treating high open area as proof of a particular room cleanliness class, because the full ventilation system and operating conditions determine that outcome.

Solutions for Your Application

A low-open panel restricts a high-volume return location.

Use the purpose-made high-open geometry and confirm the available plenum path rather than modifying structural members on site.

Openings become obstructed after cable additions.

Maintain a clear route below designated high-flow modules and inspect those positions when services or equipment layouts change.

Pilihan yang boleh didapati

Choose the appropriate surface finish and support height. Plan interfaces to solid modules, maintain accessible lifting locations and specify any equipment support separately where point loads would otherwise fall across the open face.

Planning a Die-Cast Aluminum Raised Access Floor 53% Open-Area specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami