Clean-in-place system three-quarter view with three solution tanks

Sistem Utiliti Bilik Bersih

Sistem Bersih di Tempat

A three-tank automated cleaning skid that prepares, heats, circulates and recovers rinse and detergent solutions through hygienic process equipment.

Automated recipe-controlled cleaning
Three segregated solution tanks
Heated sanitary circulation loop

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The clean-in-place system stores rinse water and detergent solutions in dedicated stainless tanks, heats the selected medium through a plate heat exchanger and circulates it through connected process equipment without disassembly. Return temperature, conductivity and flow signals support phase changeover and repeatable recovery or drain decisions.

Ciri-ciri Utama

Three segregated stainless tanks

Sanitary centrifugal circulation pump

Plate heat exchanger heating

Automated valve manifold

Temperature and conductivity monitoring

Recipe-based sequencing

Detergent recovery routing

Integrated HMI control

Penyelesaian untuk permohonan anda

Effective CIP depends on sufficient turbulence, correct detergent concentration, controlled temperature, complete surface wetting and reliable phase separation.

Low return velocity leaves product residueSize the circulation pump and return path for turbulent cleaning flow at the connected equipment.

Detergent strength varies between cyclesUse conductivity feedback and controlled water or concentrate make-up.

Cleaning phases mix and waste utilitiesApply return conductivity and temperature logic to route each phase to recovery or drain.

Cold solution cleans slowlyHeat the circulating medium through a sanitary plate heat exchanger with regulated utility flow.

Permohonan yang biasa

Bioreactor and vessel cleaningHygienic process pipingFilling and transfer equipmentPlate heat exchangersFood and beverage process lines

Parameter teknikal

Tank volume, pump duty, heater area, number of circuits and automation are selected for connected equipment and cleaning recipes.

Bahan Teras	316L stainless steel solution tanks and hygienic product-contact piping
Ketebalan Panel	Tank wall typically 2.0–5.0 mm
Lebar berkesan	Skid width typically 1500–3500 mm
Panjang maksimum	Complete skid length typically up to 6000 mm
Keluli Menghadapi Ketebalan	Kotak kawalan dan plat skid biasanya berukuran 1.5-3.0mm
Ketumpatan teras	Ketumpatan keluli tahan karat 316L kira-kira 8000 kg/m³
Kekonduksian Terma	Keluli tahan karat 316L kira-kira 15 W/(m · K) pada suhu ambien
Kemasan permukaan	Polished tank and piping interiors with satin external stainless finish
Jenis Bersatu	Orbital-welded sanitary piping with clamp-connected valves, instruments and plate heat exchanger
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

One to five solution tanksSingle or multiple cleaning circuitsElectric or steam heatingDetergent dosingConductivity analyzerReturn recovery moduleRemote recipe management

Planning a Clean-in-Place System specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami