UV water sterilizer three-quarter view with stainless reactor and controller

클린룸 유틸리티 시스템

UV 물 멸균기

An inline ultraviolet reactor that applies a controlled germicidal UV dose to process water without adding a chemical disinfectant.

Chemical-free UV treatment
316L hygienic reactor
Real-time lamp monitoring

견적 요청 제품 찾아보기

상품 소개

The UV water sterilizer directs water through a polished stainless chamber surrounding a protected ultraviolet lamp. A matched power supply, UV sensor and operating controller help maintain the selected treatment dose while sanitary connections integrate the unit into purified-water or process-water piping.

주요 기능

316L inline treatment chamber

Quartz lamp sleeve

UV 강도 센서

Lamp operating-hour monitoring

Sanitary clamp process ports

Separate electrical control cabinet

Low-pressure or medium-pressure lamp selection

수직 또는 가로 설치

응용 프로그램 솔루션

Effective UV treatment requires adequate water transmittance, verified lamp output, correct hydraulic exposure and routine sleeve maintenance.

Lamp ageing reduces delivered doseMonitor UV intensity and operating hours and replace lamps at the planned service interval.

Mineral film blocks UV transmissionInspect and clean the quartz sleeve according to feed-water quality and runtime.

High flow shortens exposure timeSize the chamber and lamp power for peak flow and measured UV transmittance.

Operators cannot verify treatment statusUse continuous UV output, lamp-fault and flow-interlock signals at the controller.

일반적인 응용 프로그램

Purified Water distribution loopsWFI loop microbial controlRO pretreatment biofouling controlProcess-water disinfectionFood and beverage ingredient water

기술 매개변수

Reactor size, lamp technology, electrical power and monitoring range are selected from peak flow, UV transmittance and target dose.

핵심 재료	316L stainless steel reactor with fused-quartz lamp sleeve
패널 두께	Reactor wall typically 2.0–6.0 mm
유효 폭	Reactor diameter typically 100–600 mm
최대 길이	Complete reactor length typically up to 2200 mm
강철 면면 두께	Control enclosure sheet typically 1.2–2.0 mm
코어 밀도	316L 스테인리스 밀도 대략 8000 kg/m³
열전도도 (Thermal Conductivity)	316L 스테인리스 주위 온도에서 대략 15 W/(m · K)
표면 마무리	Electropolished or mechanically polished product-contact chamber with satin external finish
접합 유형	Sanitary clamp process ports with sealed quartz sleeve and threaded sensor/service ports
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Low- or medium-pressure UV lampAutomatic sleeve wipingUV transmittance sensorFlow meter interlockRemote status communicationVertical mountingAlternative control enclosure rating

Planning a UV Water Sterilizer specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.