Three-quarter view of sulfur compound molecular filter with purple hybrid pellets

공기 필터 및 화학 여과

유황 화합물 분자 필터

A hybrid adsorbent filter formulated for hydrogen sulfide, sulfur dioxide and odorous mercaptans in demanding industrial air streams.

H2S and SO2 Control
Hybrid Reactive Media
Corrosion Protection
High-Capacity Deep Bed

견적 요청 제품 찾아보기

상품 소개

This molecular filter contains chemically treated alumina, activated carbon or co-formed hybrid pellets with high reactivity toward reduced and oxidized sulfur compounds. The adsorbent bed is held in a robust perforated cassette that controls residence time and prevents channeling. It is used where sulfur gases create corrosion, odour or process-yield problems, including wastewater, pulp processing and industrial control environments. Media grades can be arranged in stages when VOCs are also present.

주요 기능

Hybrid chemistry targets both hydrogen sulfide and broader acidic sulfur species.

Spherical pellets maintain open airflow passages through a deep media bed.

Corrosion-resistant retainers confine media in aggressive industrial environments.

Separate media stages prevent VOC loading from consuming sulfur-specific capacity.

응용 프로그램 솔루션

Sulfur gases can cause rapid electronic corrosion and severe odour at concentrations too low for particle filters to affect.

Hydrogen sulfide corrodes copper traces inside control cabinets.Reactive sulfur media removes H2S before make-up air reaches sensitive electronics.

High humidity shortens the apparent capacity of conventional carbon.Hybrid or impregnated pellets are selected for the expected sulfur species and moisture level.

Mercaptan odour persists after particulate treatment.A chemically active deep bed captures reduced-sulfur molecules that pass through dust filters.

A mixed contaminant stream exhausts one adsorbent prematurely.Dedicated sulfur and VOC stages divide the load according to each media's adsorption chemistry.

일반적인 응용 프로그램

Wastewater treatment plantsPulp and paper control roomsOil and gas facilitiesBiogas conditioning roomsIndustrial electronics protection

기술 매개변수

Typical construction values for a sulfur-compound molecular filter are listed below.

핵심 재료	Impregnated activated alumina, treated carbon or hybrid pellets for H2S, SO2 and mercaptans
패널 두께	150–300 mm overall filter depth
유효 폭	305–610 mm nominal cell width
최대 길이	Up to 762 mm nominal cell height
강철 면면 두께	0.8–1.5 mm coated or 304 stainless-steel casing
코어 밀도	600–850 kg/m³ packed hybrid-media bulk density
열전도도 (Thermal Conductivity)	0.12–0.28 W/(m·K) for the pellet bed
표면 마무리	Brushed 304 stainless steel or corrosion-resistant powder coating
접합 유형	Deep-bed cassette with perforated retainers, sealed corners and EPDM perimeter gasket
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

H2S-selective hybrid pelletsSO2 and acid-gas media blendStainless-steel refillable cellSeries arrangement with VOC carbon

Planning a Sulfur Compound Molecular Filter specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.