STjh extra-wide 8 foot horizontal clean bench with two-section rear HEPA wall and dual work positions

STJH-HORIZONTAL-CLEAN-BENCH-8FT

Horizontal Laminar Flow Clean Bench 8 ft

The widest horizontal clean bench for long precision assemblies or carefully separated multi-position workflows.

8 ft extra-wide work zone
Continuous rear-to-front HEPA flow
Long-assembly and multi-position capacity

견적 요청 제품 찾아보기

상품 소개

At eight feet wide, this model supports long fixtures, extended kitting operations or two coordinated work positions beneath one continuous horizontal clean-air source. The rear HEPA wall sends filtered air across the full work depth toward the open front. Because the zone is unusually broad, fixture placement and operator movement must be planned to prevent cross-flow wakes between adjacent tasks.

주요 기능

Extended assembly coverage

The eight-foot span keeps long products and fixtures inside one protected airflow zone.

Separated work positions

Two stations can share the enclosure when materials and movements remain clearly divided.

Unobstructed vertical clearance

Horizontal airflow allows tall process equipment without a close overhead diffuser.

기술 매개변수

Nominal Width	8 ft
Airflow Direction	Horizontal, rear to front
Final Filter	HEPA
Work-Zone Condition	ISO Class 5 or better
Application Type	Non-hazardous product protection
Work Arrangement	Extended process or two coordinated positions
Interior Material	Stainless steel option
Airflow Monitoring	Built-in monitor option
Electrical Configuration	Domestic or international selections
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

Applications

For long precision assemblies, large kitting processes and non-hazardous multi-position work in electronics, optics and life-science production. Perform airflow checks with the full fixture layout installed.

Solutions for Your Application

A long assembly extends beyond the protected width of standard benches.Use the eight-foot span to keep the entire critical length in the HEPA airflow.

Two work positions create turbulent cross-traffic.Separate task zones and establish a common frontward material flow without hand movements crossing upstream.

사용 가능한 옵션

Configure interior depth, stainless surfaces, stand arrangement, airflow monitor, lighting, service fixtures and power supply. Process-specific dividers may be added only if they do not disrupt airflow.

Planning a Horizontal Laminar Flow Clean Bench 8 ft specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.