클린룸 장비 및 무균 시설 필수품의 원스톱 공급업체국제 프로젝트 지원
Open mobile navigationClose mobile navigation
/ 제품 / Cleanroom Air Filters / High-Temperature HEPA Filter 350 C Ceramic-Frame H14
STJH-HIGH-TEMP-HEPA-H14-350C

High-Temperature HEPA Filter 350 C Ceramic-Frame H14

A ceramic-frame H14 separator filter for continuous ultra-clean hot-air service up to 350 C.
  • 350 C continuous limit
  • Ceramic composite frame
  • Braided glass-fiber gasket
견적 요청 제품 찾아보기

상품 소개

This extreme-temperature filter replaces metal and elastomeric components with a ceramic composite frame, glass-fiber separators, ceramic sealant and a braided glass-fiber gasket. The complete construction supports continuous operation up to 350 C at 99.99% efficiency at 0.3 micron. It is reserved for the hottest sterilization-tunnel and oven zones where the 260 C stainless model lacks temperature margin.

주요 기능

Extreme heat capability

The ceramic-based material system removes the lower-temperature elastomeric interfaces used in cooler HEPA designs.

All-inorganic hot-side pack

Glass-fiber separators and ceramic sealant preserve pleat spacing and pack retention at elevated temperature.

Dedicated tunnel-zone selection

The 350 C rating provides operating margin for ultra-clean oven sections beyond the range of stainless silicone-sealed filters.

기술 매개변수

Efficiency Rating99.99% at 0.3 micron
Maximum Continuous Temperature350 C
Frame MaterialCeramic composite
MediaHigh-temperature glass fiber
Separator MaterialGlass fiber
Pack SealantCeramic compound
Perimeter GasketBraided glass fiber
ConstructionDeep-pleat high-temperature separator pack
Intended ZoneHigh-temperature sterilization tunnel or clean oven
사용자 정의의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

Applications

Designed for ultra-clean pharmaceutical ovens and high-temperature sterilization tunnels operating continuously up to 350 C. The casing, support system and downstream materials must also tolerate this temperature, and the heating profile should avoid abrupt thermal shock to the ceramic frame.

Solutions for Your Application

A stainless 260 C HEPA filter leaves no margin at the hottest validated operating point.Use the ceramic-frame assembly when the continuous process requirement extends to 350 C.
Ceramic components crack when the filter is handled like a conventional metal box.Support the full base during transport and installation, and apply housing clamps evenly without point loading.

사용 가능한 옵션

Confirm filter dimensions, operating airflow, heat-up and cool-down rates, gasket face and support method for the hot zone.

Planning a High-Temperature HEPA Filter 350 C Ceramic-Frame H14 specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.
저희에게 이메일 whatsapp WeChat

제품

뉴스

회사 소개

문의하기