영어
독일어
아랍어
프랑스어
인도네시아어
일본어
한국어현재 Current
말레이어
포르투갈어
러시아어
스페인어
태국어
터키어
베트남어
A gentle main closing speed leaves the latch unengaged.
Tune the final stage separately through its dedicated valve.
STJH-CLEANROOM-SLIDE-CHANNEL-DOOR-CLOSER-SOFTCLOSE
Cleanroom Slide-Channel Door Closer Soft-Close
Tune the last part of door travel independently with a soft-close hydraulic guide-rail closer.
- A separate valve adjusts the final 15-degree stage.
- Front adjustment points simplify access after installation.
- Integrated backcheck moderates forceful opening.
상품 소개
This overhead closer adds a separately adjustable low-angle closing stage to a guide-rail mechanism. The main body carries hydraulic adjustment points, and a sliding lever transfers the leaf movement into the closer. Independent control near the latch allows the final motion to be tuned separately from the wider closing arc. The arrangement suits single-action doors where air resistance or latch behaviour makes one uniform closing-speed setting difficult to use.
주요 기능
- A separate valve adjusts the final 15-degree stage.
- Front adjustment points simplify access after installation.
- Integrated backcheck moderates forceful opening.
기술 매개변수
| Mechanism | Hydraulic guide-rail closer |
|---|---|
| Force Range | EN 2–6 |
| Leaf Width Limit | 1400 mm |
| Final Closing Zone | 15° to 0° |
| Main Closing Speed | Independently adjustable |
| Latching-Speed Control | Separate valve |
| Backcheck | Integrated hydraulic |
| Door Handing | Left or right |
| Adjustment Access | Front of closer |
| 사용자 정의 | Rail and mounting arrangements can suit the required single-door installation. |
Applications
- Cleanroom doors affected by closing air resistance.
- Single-action access doors requiring careful final latching.
Solutions for Your Application
Opening impact stresses the door stop.
The integrated backcheck slows the forceful opening motion.
사용 가능한 옵션
- Height-adjustable guide rail.
- Mounting plate.
- Opening-restrictor rail.
Planning a Cleanroom Slide-Channel Door Closer Soft-Close specification?
치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.
