Automatic hinged access
Powered swing leaves open the wide passage without manual contact during cargo movement.
This cargo chamber uses a 76.5 in wide by 102 in deep enclosure with automatic swing doors at the transfer path. HEPA-filtered jets remove loose particles from palletized material and wheeled equipment before cleanroom entry. The swing leaves provide a familiar hinged opening where sufficient approach and door-clearance space is available.
Powered swing leaves open the wide passage without manual contact during cargo movement.
The footprint accommodates pallet jacks and wheeled loads rather than only personnel.
Recirculated HEPA air jets dislodge loose particles before the load reaches the clean side.
| External Size | 76.5 W x 102 D x 119 H in |
|---|---|
| Primary Load | Pallets, carts and wheeled equipment |
| Door Type | Automatic swing |
| Air Filtration | HEPA |
| Airflow Pattern | High-velocity recirculating jets |
| Passage | Straight-through cargo transfer |
| Door Control | Automatic interlocked sequence |
| Standard Voltage | 240 V |
| Installation Clearance | Swing-leaf operating zones at both ends |
| 사용자 정의 | 의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다. |
For moving palletized supplies, carts and process equipment from warehouse or staging areas into controlled manufacturing. Clear approach zones are required so the powered swing leaves do not conflict with parked loads.
Select door handing, activation sensors, cycle timer, floor treatment, wall finish and safety devices. Confirm the load turning radius outside each swing door.
치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.