STjh 1175 x 875 mm aluzinc fan filter unit with a broad deck, recessed fan beneath wire mesh and top speed control

STJH-ALUZINC-COATED-STEEL-FFU-1175X875

Fan Filter Unit 1175 × 875 mm Aluzinc-Coated Steel

A wider intermediate aluzinc FFU for process tools and clean bays needing more outlet area.

1175 x 875 x 280 mm housing
1170 x 870 x 69 mm filter
42 kg intermediate assembly

견적 요청 제품 찾아보기

상품 소개

The 1175 x 875 mm model expands the filter width to 870 mm and uses a slightly deeper 280 mm cabinet. At 42 kg, it provides a larger clean-air footprint than the 575 mm wide version without reaching the span or weight of the 1175 mm square unit. The aluminized-zinc steel housing and 0.35-0.50 m/s velocity range are retained for consistent family construction and balancing.

주요 기능

Expanded outlet width

The 870 mm filter face covers broader tools and inspection cells than the narrow family member.

Deeper intermediate plenum

The 280 mm housing distinguishes this size and accommodates airflow distribution across the wider face.

Consistent velocity envelope

The same 0.35-0.50 m/s range allows this model to be balanced within the accepted family duty.

기술 매개변수

External Dimensions	1175 x 875 x 280 mm
Filter Dimensions	1170 x 870 x 69 mm
Housing Material	Aluminized-zinc steel plate
Face Velocity	0.35-0.50 m/s
Sound Level	No more than 50 dBA
Unit Weight	42 kg
Airflow Direction	Vertical filtered-air supply
Installation	Supported rectangular cleanroom ceiling mounting
Service Configuration	Plenum-side fan and control access
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

Applications

Designed for broader process tools, inspection cells and intermediate ceiling modules where a 575 mm wide outlet is insufficient. The 42 kg load should be distributed along the perimeter, and fan duty should be set from the final system resistance.

Solutions for Your Application

The compact family size leaves uncovered width over the process.Select the 870 mm filter face to extend clean-air coverage without adopting the full square module.

The wider body imposes more load on the ceiling grid.Support the full rectangular perimeter and verify the frame for the listed 42 kg unit weight.

사용 가능한 옵션

Confirm filter grade, power supply, speed control, gasket or seal and ceiling support. Surface finish and access direction can be adapted to the cleaning and service environment.

Planning a Fan Filter Unit 1175 × 875 mm Aluzinc-Coated Steel specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.