Complete static-dissipative cleanroom wall panel with conductive coating

클린룸 벽 및 천장 시스템

정적 방수성 클린룸 벽 패널

A metal-faced cleanroom wall panel finished with a static-dissipative epoxy coating and integrated into a bonded grounding path, designed to reduce charge accumulation around sensitive electronics and precision processes.

Static-Dissipative Epoxy Surface
10⁷–10⁹ Ohms/Square
Bonded Grounding Path
Non-Shedding Honeycomb Core

견적 요청 제품 찾아보기

상품 소개

Static-Dissipative Cleanroom Wall Panels combine conductive or dissipative epoxy-coated metal facings with an aluminum honeycomb core and electrically bonded perimeter profiles. The functional surface limits charge accumulation and allows it to move toward designated grounding points. Electrical continuity depends on coatings, metal joints, fasteners and earth connections working as one system. The non-shedding cellular core keeps panel weight low and supports a flat wall face, making this construction suitable for microelectronics, optics and other controlled areas where electrostatic charge can damage sensitive components.

주요 기능

Conductive epoxy coating provides a controlled surface-resistance range instead of an ordinary insulating paint layer.

Metal perimeter profiles form defined continuity points between neighboring wall modules.

Grounding lugs connect the panel run to the facility equipotential bonding network.

Aluminum honeycomb supports a flat non-shedding surface at low overall weight.

Accessible test points allow routine resistance and continuity measurements after installation.

응용 프로그램 솔루션

Effective static control requires the correct resistance range, reliable grounding continuity and cleaning that does not insulate the surface.

An antistatic label does not reveal whether charge can actually dissipate to earth.Specified surface resistance, bonded joints and measured grounding continuity define the complete path.

Insulating sealant or paint overspray can interrupt conductivity between panels.Dedicated metal bonding points bypass decorative seals and maintain electrical continuity.

Wax or incompatible cleaner can leave an insulating film on the functional coating.Compatible residue-free cleaning products preserve the measured dissipative surface behavior.

A hidden loose ground connection can leave an entire wall run electrically floating.Visible test terminals allow scheduled point-to-ground verification without dismantling panels.

일반적인 응용 프로그램

Semiconductor fabrication cleanroomsElectronics assembly and test roomsPrecision optics laboratoriesBattery and sensor production areasESD-controlled equipment enclosures

기술 매개변수

Typical construction specifications for static-dissipative cleanroom wall panels are listed below.

핵심 재료	Non-shedding aluminum honeycomb
패널 두께	12.7, 25 or 50 mm
유효 폭	Up to 1220 mm
최대 길이	4420 mm
강철 면면 두께	0.50–0.80 mm conductive-coated metal facing
코어 밀도	약 27 kg / m 3
열전도도 (Thermal Conductivity)	0. 11 - 0. 15 W / (m · K)
표면 마무리	Static-dissipative epoxy, 10⁷–10⁹ Ω/sq. when tested to ASTM D257
접합 유형	Electrically bonded aluminum-framed joint with grounding provision
사용자 정의	사용 대상 어플리케이션 및 운영 환경에 따라 사용 가능

사용 가능한 옵션

Conductive or static-dissipative resistance rangeGrounding lug locationsSingle- or double-wall systemAlternative honeycomb panel thickness

Planning a Static-Dissipative Cleanroom Wall Panel specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.