Sanitary plate heat exchanger three-quarter view with blue compression frame

클린룸 유틸리티 시스템

위생판 열교환기 (Heat Exchanger)

A configurable gasketed plate-and-frame exchanger that provides efficient heating, cooling or heat recovery while preserving a cleanable hygienic flow path.

316L corrugated plate pack
Cleanable hygienic flow channels
Expandable thermal capacity

견적 요청 제품 찾아보기

상품 소개

The sanitary plate heat exchanger transfers heat through a compressed pack of thin corrugated stainless plates. Alternating product and utility channels provide high surface area in a compact frame, while hygienic port geometry, compatible gaskets and accessible plate surfaces support inspection and cleaning.

주요 기능

316L product-contact plates

High-area chevron plate pattern

Gasketed serviceable plate pack

Hygienic clamp connection options

Uniform port-to-channel distribution

Adjustable compression frame

Expandable plate count

Optional double-wall plate arrangement

응용 프로그램 솔루션

Reliable hygienic heat transfer depends on correct plate selection, gasket compatibility, uniform tightening and flow conditions that limit fouling.

Product fouls poorly distributed channelsSelect hygienic distribution areas and plate patterns suited to viscosity and solids loading.

Utility fluid could cross-contaminate productUse a double-wall plate option or monitored pressure strategy where risk assessment requires added separation.

Gaskets deteriorate under chemicals or heatMatch EPDM, NBR or alternative gasket compounds to temperature and cleaning chemistry.

Uneven tightening causes leakageCompress the plate pack uniformly to the specified frame dimension and inspect tie bars during service.

일반적인 응용 프로그램

Purified Water heating and coolingBiopharmaceutical buffer temperature controlFood and beverage pasteurizationCIP solution heat recoveryPersonal-care product processing

기술 매개변수

Plate count, channel gap, port size, frame rating and gasket compound are selected for the required fluids and thermal duty.

핵심 재료	316L stainless steel heat-transfer plates with selected hygienic elastomer gaskets
패널 두께	Corrugated heat-transfer plates typically 0.5–0.8 mm
유효 폭	Plate-pack effective width typically 200–1200 mm
최대 길이	Complete frame length typically up to 5000 mm depending on plate count
강철 면면 두께	Frame pressure plates typically 12–50 mm
코어 밀도	316L 스테인리스 밀도 대략 8000 kg/m³
열전도도 (Thermal Conductivity)	316L plate material approximately 15 W/(m·K) at ambient temperature
표면 마무리	Formed stainless plate surfaces with smooth hygienic ports and coated or stainless frame
접합 유형	Gasketed plate channels compressed by tie bars, with sanitary clamp or hygienic threaded ports
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

EPDM or NBR gasketsSingle- or double-wall platesAlternative plate alloysInsulated coverStainless frameVariable plate countClamp or hygienic threaded ports

Planning a Sanitary Plate Heat Exchanger specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.