Complete room pressure control package with white wall display, pressure sensor and blue damper actuator

클린룸 제어 및 환경 모니터링 시스템 (Cleanroom Control and Environment Monitoring Systems)

룸 압력 제어 시스템

A fast room-level control package that compares differential pressure with setpoint and modulates supply or exhaust airflow to preserve the intended pressure cascade.

Fast Pressure Response
Door-Aware Control Logic
Supply and Exhaust Coordination
Local Pressure Display

견적 요청 제품 찾아보기

상품 소개

The room pressure control system combines a low-range differential pressure sensor, room controller, modulating airflow device and local display. It regulates the offset between supply and exhaust so the room remains positive or negative relative to its reference space. Door contacts allow the controller to suspend aggressive correction while a door is open, avoiding actuator hunting and airflow overshoot. The local display gives occupants immediate status while the network interface sends pressure, alarms and operating mode to the supervisory system.

주요 기능

Low-range differential measurement resolves the small pressure relationships used in cleanrooms.

Door-open logic reduces unnecessary damper movement during normal personnel passage.

Cascade control can coordinate supply and exhaust devices around a defined airflow offset.

Local indication and remote network values present the same room condition to users and operators.

응용 프로그램 솔루션

Room pressure can change within seconds when a door opens, an exhaust device changes state or an airflow path becomes restricted.

A door opening causes the controller to drive the airflow device to an extreme position.Door-aware logic holds or limits correction until the doorway disturbance has cleared.

Independent supply and exhaust loops fight each other and destabilize the room.A coordinated airflow offset maintains one consistent pressure-control strategy.

Small pressure changes are hidden by an unsuitable high-range sensor.A dedicated low-differential-pressure transducer provides the resolution needed for room control.

Occupants cannot tell whether the room is safe to enter.A color status display and audible alarm make the current pressure condition visible at the door.

일반적인 응용 프로그램

Positive-pressure pharmaceutical roomsNegative-pressure containment roomsHospital isolation suitesResearch laboratory airlocks

기술 매개변수

Typical enclosure and sensing-package construction for cleanroom room pressure control is shown below.

핵심 재료	Flame-retardant polycarbonate room controller with MEMS pressure sensor and powder-coated steel damper panel
패널 두께	45-120 mm controller and display depth
유효 폭	120-240 mm room display width
최대 길이	Up to 300 mm display or controller height
강철 면면 두께	1.0-1.5 mm for the optional steel control enclosure
코어 밀도	1180-1220 kg/m³ for polycarbonate housing parts
열전도도 (Thermal Conductivity)	0.19-0.22 W/(m·K) for polycarbonate housing material
표면 마무리	Smooth white polycarbonate display face with blue backlit status screen
접합 유형	Flush wall display with barbed pressure ports, pluggable terminals and network connector
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Positive or negative pressure modeSupply or exhaust damper controlDoor contact integrationBACnet 또는 Modbus 통신

Planning a Room Pressure Control System specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.