Complete reusable cobalt-blue cleanroom anti-slip contamination-control mat

클린룸 바닥 시스템

재사용 가능한 클린룸 오염 제어 매트

A washable low-profile polymeric mat with a naturally tacky, non-slip surface that captures floor-level particles from shoes and light wheels at controlled-area entrances.

Reusable Polymeric Surface
Foot and Wheel Particle Capture
Low-Profile Non-Slip Finish
Optional Static-Control Grade

견적 요청 제품 찾아보기

상품 소개

The reusable cleanroom contamination-control mat is formed from a dense washable polymer blend with a smooth, high-surface-energy face. As shoes and light cart wheels pass across it, contact transfers loose floor particles to the mat rather than carrying them into the controlled zone. The material can be damp cleaned to restore its working surface instead of peeling away disposable layers. Standard 1.2 or 2.0 metre widths suit entrances and corridors, while semi-permanent edge sealing or a loose-laid format can be selected for the floor construction.

주요 기능

The low 2 mm profile permits routine pedestrian and light-wheel crossing without a thick raised edge.

A naturally tacky polymer surface retains loose particulate while remaining washable and reusable.

A static-control grade can be selected where personnel and light trolley movement form part of the ESD plan.

Optional antimicrobial formulation is available for hygiene-sensitive entrances using compatible cleaning agents.

응용 프로그램 솔루션

An entrance mat must remain stable underfoot, collect contamination consistently and fit routine cleaning without becoming a recurring disposable waste stream.

Disposable sticky sheets lose performance unpredictably as their exposed layer becomes loaded.The reusable polymer surface is cleaned on a scheduled cycle to restore particle collection.

Peeling adhesive layers creates waste and can generate electrostatic charge beside sensitive processes.A washable mat avoids routine layer removal, with a static-control grade available for ESD-managed entrances.

A loose thick mat shifts or catches small cart casters at the doorway.The 2 mm material can be semi-permanently bonded and edge sealed for a low transition.

A mat sized only for one footfall does not contact the full circumference of cart wheels.Custom lengths create several consecutive contact steps along the controlled entry route.

일반적인 응용 프로그램

Cleanroom personnel entrancesGowning room transfer points인원 AirlockCritical clean corridorsLight cart and equipment wheel crossings

기술 매개변수

Typical material and dimensional data for a reusable polymeric cleanroom entrance mat are shown below.

핵심 재료	Dense washable polymer blend with optional antimicrobial or static-control formulation
패널 두께	2.0 ± 0.1 mm nominal mat thickness
유효 폭	1200 or 2000 mm standard material width
최대 길이	Up to 15000 mm for custom-cut cleanroom walkway formats
강철 면면 두께	0 mm; the mat is a flexible polymeric construction without steel facing
코어 밀도	Approximately 1200–1300 kg/m³ for the dense polymeric mat compound
열전도도 (Thermal Conductivity)	Approximately 0.15–0.25 W/(m·K) for the polymeric mat material
표면 마무리	Optically smooth, naturally tacky and non-slip polymer surface in selected solid colours
접합 유형	Semi-permanent bonded and edge-sealed installation or removable loose-laid mat with tapered perimeter
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Semi-permanent or removable floating format1200 or 2000 mm standard widthMidnight, slate, green, red, cobalt or titanium colourCustom-cut entry shapes and tapered edge treatment

Planning a Reusable Cleanroom Contamination-Control Mat specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.