Three-quarter view of a complete pass box UV lamp with stainless mounting reflector

클린룸 장비 예비 부품

패스 박스 UV 램프

A compact UV-C lamp and stainless mounting reflector for restoring the timed irradiation function of a compatible cleanroom pass box.

Complete Lamp Assembly
Quartz UV-C Tube
Stainless Mounting Trough
Service-Ready Wiring

견적 요청 제품 찾아보기

상품 소개

The pass box UV lamp is a replaceable irradiation assembly installed inside a compatible transfer chamber. A low-pressure UV-C tube is supported by heat-resistant ceramic holders on a shallow stainless-steel trough that also provides a stable mounting surface. The reflector, tube length, holder spacing, supply cable and ballast requirements must match the original equipment. UV-C output is invisible and potentially hazardous, so the lamp is intended for an enclosed, interlocked cycle that prevents personnel exposure while the chamber is operating.

주요 기능

A replaceable double-ended quartz tube keeps the light source separate from the permanent chamber structure.

Ceramic end holders provide stable support near the lamp terminals during repeated operating cycles.

The formed stainless trough combines mounting, protection and directional reflection in one serviceable part.

A short color-coded lead simplifies connection to the existing pass box control circuit when specifications match.

응용 프로그램 솔루션

Successful replacement depends on matching the mechanical envelope, electrical control gear and enclosed safety interlock of the original pass box.

A tube with the wrong length or terminal spacing will not seat correctly in the existing holders.Overall tube length, holder center distance and end connection are matched to the original lamp assembly before supply.

An incompatible ballast or supply circuit can reduce output or shorten lamp life.Lamp wattage, operating current and control-gear type are selected as a coordinated electrical set.

Unshielded UV-C operation creates an exposure hazard when a chamber door is opened.The replacement is used only with a functioning door interlock, enclosure and timed control sequence.

Dust or residue on the tube and reflector reduces delivered irradiance inside the chamber.The accessible trough and removable tube support scheduled inspection and cleaning with compatible procedures.

일반적인 응용 프로그램

Static pass box UV-C modulesDynamic transfer chamber lamp replacementLaboratory material hatch irradiationEnclosed cleanroom pass-through disinfection cycles

기술 매개변수

Typical construction and envelope ranges for enclosed pass box UV-C replacement lamp assemblies are listed below.

핵심 재료	Low-pressure UV-C discharge tube in quartz glass with ceramic holders and stainless mounting trough
패널 두께	1.0-1.5 mm formed stainless trough wall
유효 폭	45-80 mm nominal reflector and mounting width
최대 길이	Up to 900 mm overall assembly length
강철 면면 두께	1.0-1.5 mm stainless-steel reflector thickness
코어 밀도	Approximately 2200 kg/m³ for quartz glass tube material
열전도도 (Thermal Conductivity)	1.1-1.4 W/(m·K) for fused quartz tube material
표면 마무리	Satin stainless trough, white ceramic holders and clear to pale-blue quartz tube
접합 유형	Double-ended tube retained by two ceramic holders with hardwired cable exit
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Matched lamp wattageAlternative assembly lengthBallast-compatible wiringCustom mounting-ear spacing

Planning a Pass Box UV Lamp specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.