Four-chamber stainless nitrogen storage cabinet with RH controller

클린룸 가구 및 스테인레스 스틸 제품

질소 저장 캐비닛

A four-chamber Type 304L stainless cabinet that distributes dry nitrogen through a side plenum and monitors relative humidity without exposing every shelf during access.

Four independently gasketed chambers
Side nitrogen distribution plenum
Flowmeter and digital RH monitor
Automatic relief and bleed valves

견적 요청 제품 찾아보기

상품 소개

The nitrogen storage cabinet divides a tall Type 304L stainless enclosure into four independently accessed dry-storage chambers. A sealed side plenum distributes the nitrogen supply to each level, while individual relief-and-bleed valves prevent pressure from accumulating behind the gasketed clear doors. Perforated stainless shelves support moisture-sensitive components without obstructing gas circulation. A blue control strip carries the inlet flowmeter, regulator and green digital RH display, allowing cabinet conditions to be observed without opening a chamber. Lift-style compression latches pull each door evenly onto a mechanically retained blue gasket.

주요 기능

Four separate doors limit the volume exchanged with room air when one shelf level is accessed.

A common vertical plenum introduces nitrogen at every chamber instead of relying on slow migration from one inlet.

Relief-and-bleed valves release excess pressure while preserving a controlled purge path through the enclosure.

The external flowmeter and RH display keep gas adjustment and condition monitoring outside the storage volume.

응용 프로그램 솔루션

Low-humidity storage needs controlled gas distribution and minimal moisture recovery time after routine access.

Opening one large cabinet door replaces dry gas around every stored item with humid room air.Four independently sealed chambers restrict each access event to one shelf volume.

A single nitrogen inlet creates uneven purge conditions between upper and lower shelves.The full-height side plenum feeds each chamber through its own distribution branch.

Unregulated gas flow can pressurize the enclosure and strain door seals.Automatic relief-and-bleed valves provide a defined outlet as nitrogen enters each chamber.

Operators cannot distinguish low flow from a moisture excursion without opening the cabinet.An external flowmeter and digital RH display show gas delivery and chamber condition at the front panel.

일반적인 응용 프로그램

습도에 민감한 전자 부품 저장소Semiconductor wafer and sensor holdingOptical coating material protectionLaboratory reagent dry storageMedical-device component staging

기술 매개변수

Typical configurable specifications for a four-chamber stainless nitrogen storage cabinet are listed below.

핵심 재료	Type 304L stainless steel four-chamber enclosure with clear static-dissipative door windows, perforated shelves, nitrogen plenum, flowmeter and relief valves
패널 두께	1.2–1.5 mm stainless enclosure, chamber dividers and perforated shelves
유효 폭	635 mm overall cabinet width
최대 길이	1664 mm maximum overall cabinet height
강철 면면 두께	1.2–1.5 mm Type 304L stainless body, chamber frames and side distribution plenum
코어 밀도	유형 304L 스테인리스를 위한 7900-8000 kg/m³
열전도도 (Thermal Conductivity)	유형 304L 스테인리스를 위한 14-16 W/(m · K)
표면 마무리	Brushed stainless enclosure with clear static-dissipative windows, blue mechanically retained door gaskets and blue control strip
접합 유형	Seam-welded divided enclosure with independently gasketed lift-latch doors, sealed side purge plenum, threaded gas inlet and automatic relief-and-bleed valves
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Manual flowmeter or automatic RH controllerThree-, six- or eight-chamber cabinet layouts유형 316L 스테인리스 건축Data logging and temperature sensing module

Planning a Nitrogen Storage Cabinet specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.