Complete matte-white cleanroom illuminance sensor with opal optical dome

클린룸 제어 및 환경 모니터링 시스템 (Cleanroom Control and Environment Monitoring Systems)

광도 센서

A ceiling or wall-mounted lux sensor that measures incident light for cleanroom illumination monitoring and dimming control.

Cosine-Corrected Lux Measurement
Low-Profile Optical Head
0-10 V or 4-20 mA Lux Signal
Lighting Control Integration

견적 요청 제품 찾아보기

상품 소개

The cleanroom illuminance sensor uses a photodiode and optical diffuser to measure light arriving from a broad field of view. Cosine correction helps the response represent incident illuminance rather than only light perpendicular to the sensor. Range selection covers typical task-lighting and bright inspection environments. A standard analog or digital output supports light-level monitoring, daylight-responsive dimming and alarm reporting while the smooth white housing blends with clean ceilings.

주요 기능

A diffusing optical dome approximates cosine response across the sensor field of view.

Selectable lux ranges preserve resolution in both normal work and high-illumination areas.

Low-profile white construction minimizes visual disruption on clean ceilings.

Analog and network outputs connect to lighting controls and environmental monitoring.

응용 프로그램 솔루션

Illuminance depends on sensor orientation, shadows and surface reflections, so the measurement point must represent the actual working plane.

A sensor directly under one luminaire overstates the room's average light level.Representative placement and broad optical response reduce local hotspot bias.

Oblique light is under-read by a narrow-angle detector.A cosine-corrected diffuser captures light over a wider incidence angle.

One measurement range saturates in high-intensity inspection zones.Selectable lux ranges match the sensor to ambient or task-light applications.

Dimming causes visible hunting around the target level.Control deadband and time filtering prevent rapid response to small light fluctuations.

일반적인 응용 프로그램

Cleanroom task-light monitoringInspection-area illuminationDaylight-responsive dimmingLaboratory lighting verification

기술 매개변수

Typical construction values for a cleanroom ceiling illuminance sensor are listed below.

핵심 재료	Silicon photodiode with optical diffuser in UV-stable polycarbonate housing
패널 두께	25-45 mm sensor depth
유효 폭	70-110 mm housing diameter
최대 길이	Up to 130 mm overall housing dimension
강철 면면 두께	0 mm; non-metallic optical enclosure
코어 밀도	1180-1220 kg/m³ for polycarbonate housing material
열전도도 (Thermal Conductivity)	0.19-0.22 W/(m·K) for polycarbonate enclosure
표면 마무리	Matte white body with opal optical dome and discreet blue range mark
접합 유형	Twist-lock ceiling base or wall plate with rear pluggable signal terminals
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Multiple lux ranges천장 또는 벽 장착Voltage or 4-20 mA outputModbus or BACnet communication

Planning a Illuminance Sensor specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.