Three-quarter view of gel-seal ULPA filter with blue perimeter gel channel

공기 필터 및 화학 여과

젤 - 밀봉 ULPA 필터

A U-class mini-pleat panel with a continuous polyurethane or silicone gel channel that forms a compliant seal around a cleanroom terminal knife edge.

Continuous Fluid-Gel Seal
Knife-Edge Housing Interface
U15 Media Option
Cleanroom Terminal Format

견적 요청 제품 찾아보기

상품 소개

The gel-seal ULPA filter combines a high-efficiency mini-pleat microglass pack with a continuous fluid-gel trough in the aluminium frame. When the terminal housing's knife edge enters the gel, the compliant material surrounds small surface variations and forms a reusable sealing path without high gasket compression. The media pack is separately bonded into the frame with polyurethane, and protective grids shield both filter faces. This arrangement is widely used in cleanroom ceilings and fan filter units where a consistent perimeter seal must be achieved during repeated filter changes.

주요 기능

A continuous gel trough conforms around the housing knife edge and accommodates small flange irregularities.

The perimeter seal requires less compression force than a conventional dry gasket on a large panel.

Separate media-pack potting isolates the filtration seal from the serviceable gel channel.

Rounded aluminium corners and uninterrupted gel continuity reduce vulnerable transitions at frame joints.

응용 프로그램 솔루션

A very high-efficiency terminal filter can still fail its purpose if the large perimeter seal is uneven or difficult to reproduce after replacement.

A dry gasket needs excessive clamping pressure to seal a large ceiling panel.The knife edge displaces compliant gel and forms a continuous seal with low closure force.

Small housing flange irregularities create isolated bypass paths.Fluid gel flows locally around the knife edge and fills minor surface variations.

Gel migration contaminates the visible filter face.A correctly sized enclosed trough retains the selected polyurethane or silicone gel within the frame perimeter.

The seal is broken when the panel is removed for service.The gel can close around the knife-edge withdrawal path when handled within its service limits.

일반적인 응용 프로그램

반도체 클린룸 천장Pharmaceutical unidirectional-flow zonesFan filter units with knife-edge housingsSterile compounding areasUltra-clean process-tool enclosures

기술 매개변수

Typical construction ranges for a knife-edge gel-seal ULPA panel are listed below.

핵심 재료	Ultra-fine glass-microfibre ULPA media with thermoplastic mini-pleat separators
패널 두께	80–150 mm overall frame depth including gel channel
유효 폭	305 - 610 mm 공칭 면 너비
최대 길이	최대 1220 mm 공칭 면 길이
강철 면면 두께	0.4–0.6 mm coated-steel or stainless-steel protective faceguard
코어 밀도	Approximately 35–55 kg/m³ equivalent ULPA media-pack density
열전도도 (Thermal Conductivity)	Approximately 0.035–0.045 W/(m·K) for the dry microglass pack
표면 마무리	Natural anodized aluminium with clean white or stainless protective grids
접합 유형	Continuous polyurethane or silicone gel channel for a mating terminal knife edge
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

U15 or U16 filtration classPolyurethane or silicone gelUpstream or downstream gel-trough orientationSingle-face or dual-face protective grid

Planning a Gel-Seal ULPA Filter specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.