Blue-top ESD cleanroom workbench with grounded accessory rail

클린룸 가구 및 스테인레스 스틸 제품

ESD 워크벤치

A groundable cleanroom workstation with a static-dissipative surface and managed grounding points for sensitive electronic assembly.

Static-dissipative work surface
Common-point ground module
Conductive frame continuity
ESD-safe accessory system

견적 요청 제품 찾아보기

상품 소개

The ESD workbench creates a controlled discharge path from the operator, work surface and bench accessories to a verified common ground. A dissipative laminate or rubber work layer prevents rapid discharge while a conductive metal frame maintains electrical continuity. Ground studs, wrist-strap terminals and optional monitor points are positioned away from the active assembly surface. Smooth sealed edges and low-shedding cable channels retain cleanroom compatibility.

주요 기능

A dissipative work layer drains charge at a controlled rate instead of producing a sudden spark.

A clearly identified common-point ground connects the top, frame and operator accessories in one location.

Conductive shelves and bins can be bonded to the bench rather than forming isolated charged objects.

Enclosed power distribution keeps mains wiring separate from grounding leads and the product zone.

응용 프로그램 솔루션

Sensitive components can be damaged by charges on the operator, work surface or accessories even when the room itself is clean.

Grounding only the operator leaves trays and the work surface electrically isolated.A bonded frame and surface connect all workstation elements to the same common ground.

Highly conductive metal surfaces can discharge too rapidly into exposed devices.The dissipative work layer limits current while still removing accumulated charge.

Unlabelled grounding cords are disconnected during bench rearrangement.Dedicated colour-coded terminals keep protective earth and operator connections identifiable.

Ordinary plastic drawers and shelves accumulate charge beside components.Compatible dissipative bins and grounded metal accessories extend control beyond the tabletop.

일반적인 응용 프로그램

Semiconductor device assemblyPCB inspection and repairSensor productionMedical electronics manufacturingOptoelectronic packaging

기술 매개변수

Typical configurable specifications for an ESD cleanroom workbench are listed below.

핵심 재료	High-pressure laminate or conductive rubber ESD surface over a rigid composite core
패널 두께	20–30 mm worktop assembly
유효 폭	600-900mm 작업 표면 깊이
최대 길이	2400 mm
강철 면면 두께	1.0–1.5 mm powder-coated or stainless frame panels
코어 밀도	650–850 kg/m³ for reinforced composite worktop core
열전도도 (Thermal Conductivity)	0.15–0.30 W/(m·K) for composite worktop assembly
표면 마무리	Blue or light-grey static-dissipative matte work surface with sealed edges
접합 유형	Bonded conductive frame with common-point ground and replaceable ESD top layer
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Continuous resistance monitorWrist-strap and footwear tester portsConductive shelves and binsHeight-adjustable grounded frame

Planning a ESD Workbench specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.