ESD cleanroom garment conductive coverall three-quarter view

클린룸 의류, PPE 및 소모품

ESD 클린룸 의류

A groundable ESD cleanroom coverall combining conductive-grid fabric, connected garment panels and controlled cleanroom construction.

Conductive-grid polyester with panel-to-panel continuity
Configurable cuff grounding connection
Low-lint construction for ESD-controlled clean areas

견적 요청 제품 찾아보기

상품 소개

The ESD Cleanroom Garment is designed to participate in a facility-defined personnel grounding system while limiting particle release. Conductive-grid polyester forms the main shell, with conductive tape or thread linking the cuff, sleeves, yokes, torso and leg panels. A designated grounding stud allows connection to the approved wearer grounding route.

주요 기능

Conductive grid distributes charge across the garment surface

Integrated conductive paths connect multiple garment panels

Cuff grounding stud supports a defined bonding connection

Heat-sealed panel edges and pocket-free styling suit controlled areas

Adjustable closures help maintain body and interface coverage

응용 프로그램 솔루션

Conductive fabric alone does not ensure a safe path to ground. Panel continuity, garment bonding, compatible footwear or cord systems, laundering effects and routine verification all influence actual ESD performance.

Conductive panels can become isolated if seams do not provide continuity.Specify conductive tape or thread routes that electrically link the required garment panels.

An ungrounded conductive garment may behave as a floating conductor.Connect the designated stud to the facility-approved wearer grounding system and verify the complete system.

Laundering or damaged snaps can change the electrical path.Include garment continuity, grounding hardware and visual condition in periodic inspection and testing.

Loose cuffs or open closures can expose charge-generating personal clothing.Use fitted conductive cuffs and keep the front closure secured during ESD-controlled work.

일반적인 응용 프로그램

Suitable for semiconductor fabrication, electronics assembly, disk-drive and optics production, battery component processing, laboratories and other ESD-protected clean areas with a verified grounding program.

기술 매개변수

The following ranges describe configurable garment construction, not a complete ESD system qualification. Final electrical requirements and test methods must correspond to the facility's approved ESD control plan.

핵심 재료	Continuous-filament polyester with integrated carbon or conductive yarn grid
패널 두께	0.22-0.50mm
유효 폭	누워 520-790mm-플랫 의류 섹션
최대 길이	2050 mm
강철 면면 두께	0 mm; stainless steel may be used only for grounding studs and adjusters
코어 밀도	80–155 kg/m³ apparent fabric bulk density
열전도도 (Thermal Conductivity)	0.035-0.060 W/(m · K), 재료 의존
표면 마무리	Smooth low-lint grid weave with heat-sealed panel edges
접합 유형	Conductive sewn seams or integrated tape linking panels to a grounding stud
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Light-blue, white, navy or green conductive-grid fabricCuff stud, hip stud or defined grounding tape routeConductive knitted cuffs or adjustable woven cuffsStand collar or compatible hood interfaceOpen ankles or compatible ESD boot interfaceGarment identification for laundering and verification tracking

Planning a ESD Cleanroom Garment specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.