Cleanroom equipment access door in a complete wide double-leaf three-quarter view

클린룸 도어, 창문 및 인터락 시스템

클린룸 장비 액세스 도어

An extra-wide framed access assembly that opens a large section of a modular cleanroom wall for moving machinery, carts and production equipment.

Process Skid Transfer
Single 또는 Double Leaf
Clear Polymer Infill
Removable Mullion Option

견적 요청 제품 찾아보기

상품 소개

The Cleanroom Equipment Access Door uses tall rigid acrylic or static-dissipative PVC panels inside a reinforced powder-coated frame. Single- and double-swing configurations create a substantially wider opening than a personnel door, allowing process equipment to enter without dismantling the surrounding hardwall enclosure. Surface-mounted hinges and secure latches remain accessible for maintenance outside critical operations.

주요 기능

Wide double-swing configuration clears a large equipment transfer path.

Rigid transparent panels let operators verify the route before opening the leaves.

Reinforced frame carries tall leaves without relying on adjacent lightweight wall panels.

Independent active and inactive leaves allow partial opening for smaller transfers.

Replaceable panel construction supports future repair without replacing the full frame.

응용 프로그램 솔루션

Production equipment cannot pass through a standard personnel doorway.Wide single or double leaves create a full-height opening sized for machinery transfer.

Removing fixed cleanroom wall panels causes extended shutdown work.A permanent equipment access assembly opens without dismantling the enclosure.

Tall transparent leaves twist and lose alignment after repeated use.A reinforced perimeter frame and multiple hinges stabilize each full-height panel.

Opening the full width for every cart movement wastes conditioned air.The active leaf can operate independently while the secondary leaf remains secured.

일반적인 응용 프로그램

Process skid installationCleanroom machinery replacementLarge cart and rack transferModular production cell accessMaintenance shutdown access routes

기술 매개변수

핵심 재료	Rigid acrylic or static-dissipative PVC infill within reinforced metal framing
패널 두께	6–12 mm rigid polymer infill
유효 폭	1170–2420 mm clear opening, single or double leaf
최대 길이	Up to 2380 mm clear opening height
강철 면면 두께	Not applicable to clear panels; powder-coated steel frame typically 1.5–2.5 mm
코어 밀도	아크릴의 경우 약 1180 kg / m 3 또는 강성 PVC 의 경우 1350 - 1450 kg / m 3
열전도도 (Thermal Conductivity)	아크릴의 경우 약 0. 19 W / (m · K) 또는 강성 PVC 의 경우 0. 14 - 0. 17 W / (m · K)
표면 마무리	Clear or static-dissipative smooth panel with powder-coated steel or aluminum frame
접합 유형	Reinforced single or double swing leaves with perimeter seals, active-leaf latch and inactive-leaf bolts
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Single or unequal double leavesClear acrylic or static-dissipative PVCRemovable center mullionLockable latch and hold-open hardware

Planning a Cleanroom Equipment Access Door specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.