클린룸 설치 액세서리

클린룸 도어 가스켓

A black hollow-bulb gasket retained in a cleanroom door-frame channel to create continuous compression around the opening.

Retained Bulb Profile
Controlled Closing Force
Continuous Frame Compression
Replaceable Kerf Mount

견적 요청 제품 찾아보기

상품 소개

The cleanroom door gasket combines a hollow EPDM compression bulb with a flexible neck and arrowhead-style retaining foot. The retainer locks into a matching kerf or aluminum channel around the cleanroom door frame, keeping the seal aligned during repeated opening and closing. When the leaf engages the bulb, the hollow chamber deforms progressively to close perimeter tolerances while limiting load on hinges, latches and automatic operators.

주요 기능

A hollow bulb produces progressive compression instead of a sudden high closing force.

The arrowhead foot locks mechanically into a continuous frame channel without exposed fasteners.

Defined corner joints preserve the seal path around mitred stainless or aluminum frames.

The removable profile can be replaced independently when wear or permanent compression develops.

응용 프로그램 솔루션

A cleanroom door perimeter must close reliably without creating excessive latch force or allowing the gasket to pull out of its frame channel.

An overly stiff seal prevents consistent latching and accelerates hardware wear.The hollow bulb compresses gradually and is sized for the actual door-frame gap.

Adhesive-backed strips creep or detach during repeated cleaning and door cycles.A shaped retaining foot locks into the frame kerf for positive mechanical location.

Open corner cuts create air-leak paths at the most difficult frame transitions.Joined or molded corner sections maintain continuous compression around the complete perimeter.

A damaged seal can require disruptive frame disassembly.The replaceable insert pulls from the channel and a matching new profile presses into the existing retainer.

일반적인 응용 프로그램

Hinged cleanroom personnel doorsPass-through chamber doorsStainless equipment access doorsPharmaceutical corridor doorsControlled-environment service hatches

기술 매개변수

Typical construction ranges for a retained cleanroom door bulb gasket and matching frame channel are shown below.

핵심 재료	Black EPDM hollow bulb with flexible neck and arrowhead retaining foot
패널 두께	8-25 mm uncompressed gasket projection from the frame channel
유효 폭	10-35 mm bulb contact width
최대 길이	Up to 12000 mm continuous perimeter extrusion or custom joined door-frame set
강철 면면 두께	1.00-2.00 mm stainless or coated-steel frame skin
코어 밀도	Approximately 1050-1250 kg/m³ compact EPDM profile density
열전도도 (Thermal Conductivity)	Approximately 0.20-0.30 W/(m·K) for compact EPDM
표면 마무리	Smooth matte black compression bulb in brushed stainless or anodized aluminum channel
접합 유형	Kerf-retained continuous extrusion with bonded, mitred or molded frame corners
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

EPDM or silicone bulbArrowhead or barbed retaining footJoined rectangular frame setCustom compression height and hardness

Planning a Cleanroom Door Gasket specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.