Cleanroom computer workstation with monitor arm keyboard tray and CPU rack

클린룸 가구 및 스테인레스 스틸 제품

클린룸 컴퓨터 워크스테이션

A cleanable digital work station that integrates a monitor, keyboard and computer hardware without sacrificing the usable stainless work surface.

Sealed stainless work surface
Adjustable monitor support
Retractable keyboard tray
Protected underbench CPU rack

견적 요청 제품 찾아보기

상품 소개

The cleanroom computer workstation combines a fully encased Type 304 stainless work surface with a rigid, sealed powder-coated frame. A rear accessory rail carries the monitor arm above the bench, while the keyboard retracts beneath the front edge when it is not in use. The computer tower is supported in an open-sided underbench rack rather than standing on the floor, keeping service cables organized and preserving access for routine cleaning. Separate equipment mounts allow the screen, keyboard and CPU to be adjusted without drilling uncontrolled openings through the work surface.

주요 기능

The monitor arm positions the display above the work zone and frees the stainless surface for records, samples or scanners.

A retractable keyboard platform protects the input device between tasks while maintaining a natural operator reach.

The suspended CPU rack keeps computer hardware clear of the floor and leaves ventilation and service panels accessible.

A rear cable route separates power and data leads from the front operator area instead of allowing loose loops across the bench.

응용 프로그램 솔루션

Conventional office desks introduce loose hardware, floor-level computer towers and unmanaged cables into controlled work areas.

A monitor base and full-size keyboard consume the surface needed for paperwork and product handling.The raised monitor arm and retractable keyboard tray recover the central stainless work zone.

A computer tower placed on the floor obstructs cleaning and is exposed to accidental contact.The suspended CPU rack keeps the tower off the floor while retaining open access to its ventilation and service side.

Loose power, network and peripheral cables cross the operator area and form difficult-to-clean loops.A defined rear cable route carries separate power and data leads toward the CPU without crossing the main work surface.

Computer accessories are frequently improvised onto a bench with clamps and penetrations that do not match the furniture.One registered accessory rail accepts the monitor, keyboard and cable hardware as an integrated workstation assembly.

일반적인 응용 프로그램

Electronic batch-record entryClean manufacturing production terminalsLaboratory information-system accessBarcode and label verificationIn-process inspection data capture

기술 매개변수

Typical configurable specifications for a cleanroom computer workstation are listed below.

핵심 재료	Type 304 stainless steel work surface on a sealed powder-coated steel frame with stainless and aluminum equipment mounts
패널 두께	25–35 mm fully encased work-surface assembly
유효 폭	600–750 mm work-surface depth
최대 길이	1800 mm workstation length
강철 면면 두께	1.2–1.5 mm Type 304 stainless work-surface skin and CPU-rack panels
코어 밀도	7900–8000 kg/m³ for the Type 304 stainless work-surface skin
열전도도 (Thermal Conductivity)	14–16 W/(m·K) Type 304 스테인리스강
표면 마무리	Brushed No. 4 stainless top with light-gray and blue cleanroom powder-coated support components
접합 유형	Bolted rear accessory rail with a sealed monitor arm, retractable keyboard slide and suspended CPU cradle
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Single or dual articulated monitor armsLockable ventilated CPU enclosureLeveling feet or locking cleanroom castersIntegrated power, network and barcode-scanner mounts

Planning a Cleanroom Computer Workstation specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.