클린룸 HVAC 및 공기 처리 장비

천장 장착 공기 처리 장치 (ceiling mounted air handling unit)

A low-profile horizontal air handler that places filters, coil and fan above a ceiling where plant-room floor area is unavailable.

Low-Profile Casing
Bottom Service Access
Direct-Drive Fan
Condensate-Safe Installation

견적 요청 제품 찾아보기

상품 소개

The ceiling-mounted air handling unit condenses the required filter, coil, drain pan and fan functions into a shallow casing suspended above a corridor or support area. Hinged or removable lower panels provide service access without requiring side clearance. A direct-drive fan avoids belt maintenance in the restricted ceiling void, while a full-width drain pan and correctly trapped outlet protect the ceiling below. Flexible connections and vibration isolators limit structure-borne noise.

주요 기능

A shallow horizontal casing uses ceiling-void space while preserving occupied floor area.

Bottom-access filters and fan assemblies can be serviced from a defined ceiling hatch.

A full-width sloped drain pan controls condensate beneath the cooling coil.

Direct-drive EC or plug fans provide airflow turndown without belt adjustment overhead.

응용 프로그램 솔루션

Ceiling equipment must remain shallow, drain reliably and permit maintenance from below without contaminating the occupied space.

Side-mounted filters cannot be removed because ducts and services fill the ceiling void.Bottom-access filter tracks align with a dedicated service hatch.

A blocked drain causes water to damage the ceiling below.A sloped pan, trapped primary drain and optional overflow switch provide layered condensate protection.

Fan vibration is audible through the ceiling structure.Spring or rubber isolators and flexible duct connections decouple the unit from the building.

A deep fan section cannot fit between structure and ceiling.Compact backward-curved direct-drive fans reduce total casing height.

일반적인 응용 프로그램

Cleanroom support corridorsLaboratory ceiling voidsMedical clean spacesSmall production suitesRetrofit ventilation zones

기술 매개변수

Representative construction ranges for a low-profile ceiling air handler are shown below.

핵심 재료	Closed-cell polyurethane or mineral-wool acoustic insulation within double-skin casing
패널 두께	25–50 mm insulated low-profile panel
유효 폭	700–2200 mm nominal casing width
최대 길이	Up to 5000 mm overall suspended length
강철 면면 두께	0.5–0.75 mm galvanized or coated sheet skins
코어 밀도	38–44 kg/m³ polyurethane or 64–90 kg/m³ mineral wool
열전도도 (Thermal Conductivity)	0.023–0.040 W/(m·K) according to insulation
표면 마무리	Powder-coated galvanized outer casing with smooth galvanized inner liner
접합 유형	Gasketed folded-panel joints with bottom-access doors and flexible duct collars
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Chilled-water or DX cooling coilElectric or hot-water heating coilEC fan and constant-airflow controlPrimary and secondary drain-pan protection

Planning a Ceiling-Mounted Air Handling Unit specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.