Hermetically sealed cleanroom luminaire with compression-gasketed lens frame

클린룸 조명 및 전기 장비

공기 밀봉 클린룸 조명

A compression-sealed LED fixture designed to preserve the pressure boundary at the lens, housing seams, cable entry and ceiling interface.

Compression-Sealed Lens
Welded Enclosure Seams
Airtight Ceiling Interface
Sealed Electrical Entry

견적 요청 제품 찾아보기

상품 소개

Unlike a general cleanroom fixture, the hermetically sealed luminaire treats every enclosure path as part of the room pressure boundary. The metal back box uses continuously closed seams, the lens is compressed against a continuous gasket, and the ceiling trim seals independently to the panel opening. Cable entry passes through a rated gland or sealed conduit hub so wiring does not bypass the enclosure seal.

주요 기능

A continuous elastomer gasket is compressed uniformly around the complete lens perimeter.

Closed housing seams prevent leakage through folded corner joints.

The ceiling flange has a dedicated seal separate from the removable optical door.

A threaded cable gland closes around the incoming power cable.

Captive compression latches apply repeatable pressure after maintenance.

응용 프로그램 솔루션

Pressure-controlled rooms lose integrity when fixture seams and cable routes form parallel leakage paths around the ceiling seal.

A sealed lens still leaks through an open back-box corner.Continuously closed enclosure seams complete the barrier behind the optic.

Removing the lens disturbs the ceiling-to-fixture seal.Independent ceiling and optical gaskets separate those two interfaces.

Loose latches compress one side of the gasket more than another.Evenly spaced captive compression points load the perimeter consistently.

An ordinary cable knockout bypasses the sealed housing.A matched threaded gland seals directly around the supply cable or conduit.

일반적인 응용 프로그램

Positive-pressure aseptic roomsNegative-pressure containment areas무균 충전 스위트High-integrity airlocks

기술 매개변수

Typical configurable construction ranges for a hermetically sealed cleanroom luminaire are listed below.

핵심 재료	Continuously sealed steel or stainless enclosure with LED light engine, driver and laminated safety-glass or polymer lens
패널 두께	90-160 mm sealed back-box depth
유효 폭	300-650 mm room-side frame width
최대 길이	Up to 1250 mm complete fixture length
강철 면면 두께	1.0-1.5 mm welded steel or stainless housing
코어 밀도	Approximately 2500 kg/m³ for the sealed glass optical panel
열전도도 (Thermal Conductivity)	0.8-1.1 W/(m·K) for laminated safety glass
표면 마무리	White powder-coated or fine-brushed stainless enclosure with flush clear or opal lens
접합 유형	Dual continuous gaskets at lens and ceiling flange with welded seams and threaded cable gland
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Room-side or top-side maintenanceClear glass, opal glass or polycarbonate opticCoated steel or SUS304/SUS316L bodyPressure-test connection point

Planning a Airtight Cleanroom Light specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.