Air-cooled condensing unit with twin top fans and condenser coil

클린룸 HVAC 및 공기 처리 장비

공기 냉각 응축 유닛

A factory-assembled outdoor refrigeration unit that rejects cleanroom cooling loads directly to ambient air and supplies liquid refrigerant to a remote DX coil.

Direct Ambient Heat Rejection
Staged Scroll Compression
Weather-Resistant Cabinet
Remote DX Coil Service

견적 요청 제품 찾아보기

상품 소개

The air-cooled condensing unit combines scroll compressors, a finned outdoor condenser, axial fans, refrigerant controls and electrical protection in one weather-resistant enclosure. It connects to a remote evaporator coil in an air-handling unit, keeping compressor noise and rejected heat outside the controlled area. Independent refrigerant circuits and staged fan control can follow varying sensible and latent loads while accessible service panels simplify routine inspection.

주요 기능

Microchannel or copper-tube condenser surfaces provide a large outdoor heat-rejection area without cooling-water infrastructure.

Tandem scroll circuits allow capacity steps and retain partial cooling when one circuit is isolated.

Separate liquid and suction service connections support remote AHU evaporators and properly routed field piping.

Removable coil guards and hinged control access keep fans, compressors and electrical components serviceable from the perimeter.

응용 프로그램 솔루션

Outdoor condensers must reject a variable cleanroom load without introducing cooling water or compromising refrigeration reliability.

A mechanical room has no condenser-water loop or cooling-tower connection.Axial fans move ambient air across the condenser coil, eliminating condenser-water pumps and treatment equipment.

A single compressor cycle creates unstable supply-air temperature at low load.Multiple scroll stages and fan steps provide smaller capacity increments for steadier remote-coil control.

Long refrigerant runs can cause oil-return and pressure-drop problems.Properly sized suction and liquid connections, receivers and service valves support engineered remote-evaporator piping.

Outdoor coil fouling raises head pressure and power demand.Full-face coil guards and perimeter access allow inspection and cleaning without dismantling the cabinet.

일반적인 응용 프로그램

Pharmaceutical cleanroom air-handling systemsElectronics manufacturing make-up air unitsLaboratory dedicated outdoor-air systemsMedical-device production HVACRemote DX process-cooling air handlers

기술 매개변수

Representative commercial construction ranges for an outdoor cleanroom condensing unit are listed below.

핵심 재료	Powder-coated galvanized steel enclosure with copper-tube/aluminum-fin or all-aluminum microchannel condenser coil
패널 두께	1.0-1.5 mm removable cabinet panel thickness
유효 폭	900-2200 mm nominal cabinet width
최대 길이	Up to 4200 mm for multi-compressor assemblies
강철 면면 두께	1.0-1.5 mm galvanized steel exterior panels
코어 밀도	Approximately 2660-2840 kg/m³ for the aluminum condenser fins or microchannel heat-exchanger sections
열전도도 (Thermal Conductivity)	Approximately 113-234 W/(m·K) for the aluminum condenser heat-transfer material
표면 마무리	UV-resistant polyester powder coating over galvanized steel
접합 유형	Bolted modular casing with gasketed service panels and brazed refrigerant joints
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Single, tandem or multiple scroll-compressor circuitsCopper-tube/aluminum-fin or microchannel condenser coilLow-ambient fan control and condenser-coil guardsRemote monitoring contacts and variable-speed condenser fans

Planning a Air-Cooled Condensing Unit specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.