Three-quarter view of acid gas molecular filter with deep adsorbent bed

공기 필터 및 화학 여과

산성 가스 분자 필터

A rigid molecular-filter cell filled with acid-targeted adsorbent to reduce corrosive gaseous contaminants before they reach clean processes and sensitive electronics.

Acid-Selective Adsorbent
Deep Media Bed
Low-Dusting Retainers
Gasketed Steel Cell

견적 요청 제품 찾아보기

상품 소개

This filter places a packed bed of impregnated activated alumina, activated carbon or hybrid pellets between perforated retaining screens. The chemically treated surface captures and reacts with acidic gases such as hydrogen sulfide, sulfur dioxide, chlorine and selected nitrogen oxides. A sealed galvanized or stainless-steel frame prevents bypass, while fine outlet scrim limits carryover of adsorbent dust into controlled air systems. The configuration is suitable for make-up air, recirculation and corrosion-control stages where ordinary particle filters cannot remove molecules.

주요 기능

Uniform bed depth avoids short air paths through the adsorbent.

Impregnated media targets reactive acid gases rather than only general odours.

Corrosion-resistant screens support the pellet bed without obstructing airflow.

Replaceable or refillable constructions allow media selection to follow the contaminant profile.

응용 프로그램 솔루션

Trace acidic gases can corrode contacts and process surfaces even when particulate air quality appears acceptable.

Copper and silver contacts tarnish despite high-efficiency particle filtration.An acid-selective adsorbent stage removes molecular contaminants that pass through particulate media.

Loose pellets settle and create an untreated path at the top of the cell.Vibration-filled media and internal compression retain an even bed throughout transport and operation.

Adsorbent dust migrates toward sensitive production equipment.Perforated retainers and downstream nonwoven scrim contain fines inside the filter cell.

A single carbon grade performs poorly against a changing acid-gas mixture.Activated alumina, impregnated carbon or hybrid blends can be selected for the actual contaminant spectrum.

일반적인 응용 프로그램

Semiconductor make-up airData-centre corrosion controlPulp and paper control roomsChemical process ventilationWastewater odour treatment

기술 매개변수

Typical construction ranges for an industrial acid-gas molecular filter are listed below.

핵심 재료	Impregnated activated alumina, acid-grade activated carbon or hybrid spherical adsorbent
패널 두께	150-292mm 전체 필터 깊이
유효 폭	305–610 mm nominal cell width
최대 길이	Up to 610 mm nominal cell height
강철 면면 두께	0.8–1.2 mm galvanized or 304 stainless-steel frame and screens
코어 밀도	550–850 kg/m³ packed adsorbent bulk density
열전도도 (Thermal Conductivity)	0.10–0.25 W/(m·K) for the packed adsorbent bed
표면 마무리	Clean galvanized steel, brushed 304 stainless steel or white powder coat
접합 유형	Rigid box cell with sealed media screens and continuous neoprene or EPDM face gasket
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Impregnated alumina or carbon mediaGalvanized or stainless-steel frameHalf-size and full-size cellsRefillable or disposable construction

Planning a Acid Gas Molecular Filter specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.