Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Retrofit-focused construction
The thin wearing coat can add the selected static-control surface without installing a multi-millimetre self-leveling body.
STJH-STATIC-DISSIPATIVE-EPOXY-FLOORING-TC05
Static-Dissipative Epoxy Flooring 0.5 mm Topcoat
A dissipative epoxy wearing coat applied above an electrically insulating epoxy build layer for controlled floor refurbishment.
- 15-20 mil dissipative topcoat
- Conductive powder as a separate component
- Compatible insulating epoxy base layer
About This Product
TC05 is a three-component high-solids epoxy containing conductive powder. The topcoat is applied at approximately 0.38-0.51 mm, corresponding to 15-20 mils, above a compatible electrically insulating epoxy layer. This arrangement differs from a self-leveling conductive screed over conductive primer. It provides a thin exposed dissipative surface when the underlying floor can be retained within a compatible coating system.
Key Features
Deliberate undercoat role
The insulating epoxy layer is a specified part of the build, so the system should not be assembled by copying a conductive-primer design.
Uniform powder incorporation
Careful mixing distributes the functional powder throughout the topcoat, avoiding local areas with different material composition.
Technische Parameter
| Resin Type | High-solids epoxy |
|---|---|
| Component Count | Three |
| Functional Additive | Conductive powder |
| Topcoat Thickness | 0.38-0.51 mm |
| Mixed VOC | Below 100 g/L for the selected formulation |
| Required Undercoat | Compatible electrically insulating epoxy |
| Oberfläche Finish | Smooth |
| Electrical Function | Static dissipative |
| Installation Role | Thin wearing topcoat |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Applications
Useful for static-control refurbishment in light manufacturing, pharmaceutical support and educational laboratory facilities. The existing floor needs sufficient integrity for overcoating. Adhesion, compatibility and the chosen electrical arrangement should be considered before retaining an older resin surface.
Solutions for Your Application
The existing epoxy floor is sound but lacks the required surface function.
Prepare the compatible retained system and add the specified dissipative topcoat construction.
A conductive primer is assumed necessary for every ESD floor.
Follow this model's insulating build-coat architecture rather than mixing components from another system.
Verfügbare Optionen
Choose colour and compatible base-coat preparation. Match floor-cleaning products to the finished dissipative surface and retain the specified topcoat thickness during any future refurbishment.
Planning a Static-Dissipative Epoxy Flooring 0.5 mm Topcoat specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
