Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Controlled vertical placement
The mortar's sag-resistant character supports work on upright surfaces while the applicator shapes the radius and returns.
STJH-SEAMLESS-EPOXY-COVE-BASE-CL36
Seamless Epoxy Cove Base Capless Vertical-Grade
A vertical-grade mortar forms resin details around irregular bases without an exposed metal cap.
- Vertical-grade epoxy mortar
- 3-6 mm body thickness
- Capless upper termination
About This Product
The capless system uses a three-component epoxy mortar with graded aggregate and a formulation suited to vertical placement. A 3-6 mm body is worked around walls, curbs or machine bases, with a prepared termination anchoring the upper edge. Its value lies in the detailing flexibility: the installer can continue the resin around shapes that would be awkward to finish using straight prefabricated cove sections.
Key Features
Pre-proportioned components
Separate resin, hardener and aggregate components support consistent mixing when complete quantities are combined correctly.
Detailing around obstacles
The hand-applied material can connect the floor to curbs and machinery plinths with a continuous formed finish.
Technische Parameter
| Chemistry | Solvent-free epoxy mortar |
|---|---|
| Component Count | Three |
| Application Grade | Vertical, sag resistant |
| Body Thickness | 3-6 mm |
| Aggregate | Specially graded mineral aggregate |
| Initial Surface | Fine textured |
| Top Termination | Capless 3 mm keyed chase in concrete |
| Finishing | Compatible seal coat |
| Detail Locations | Walls, curbs and machine bases |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Applications
Use for resin-floor details around process equipment, low retaining curbs and complex internal perimeters. A capless finish depends on a sound termination: loose paint or a weak wall layer should not be left to carry the edge of the new mortar.
Solutions for Your Application
A metal capping strip introduces an unwanted ledge around equipment.
Prepare a suitable capless termination and shape the resin edge to meet the stable adjoining surface.
A general floor mortar slumps when applied vertically.
Use the vertical-grade formulation and place the material within its supported thickness range.
Verfügbare Optionen
Discuss the curb shape, cove height, finished color and top-edge arrangement. Choose a compatible sealer for the cleaning exposure, and include access restrictions around equipment so that the detail can be formed continuously.
Planning a Seamless Epoxy Cove Base Capless Vertical-Grade specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
