Compact corner fit
The 900 mm chamber depth limits the floor area consumed at a congested gowning-room junction.
This smallest L-shaped configuration places entry and exit at 90 degrees inside a 950 x 900 x 1950 mm chamber. Its 890 mm clear doorway supports single-person gowning flow while the 20-32 m/s adjustable jet range provides recirculating garment blow-off. The corner geometry is intended for retrofit vestibules where a straight-through unit would conflict with a corridor or cleanroom wall.
The 900 mm chamber depth limits the floor area consumed at a congested gowning-room junction.
Perpendicular doors redirect personnel without requiring a straight approach on both sides of the wall.
A published 20-32 m/s velocity range allows the shower cycle to be set for the garment and entry procedure.
| Internal Dimensions | 950 W x 900 D x 1950 H mm |
|---|---|
| External Dimensions | 1550 W x 1000 D x 2600 H mm |
| Door Opening | 890 W x 1950 H mm |
| Traffic Orientation | L-shaped, 90-degree turn |
| Nozzle Air Velocity | 20-32 m/s |
| Air Treatment | HEPA-filtered recirculating high-velocity jets |
| Control Mode | Programmable automatic shower cycle |
| Door Interlock | Electromagnetic interlocking entry and exit doors |
| Typical Occupancy | Single-person passage |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Best suited to compact pharmaceutical, electronics and laboratory gowning entries where personnel must turn a corner between the uncontrolled and clean sides. Verify that both approach zones provide enough swing, egress and service clearance around the 1550 x 1000 mm body.
Choose painted or stainless construction, door handing, cycle timing, access controls and indicator arrangement. Confirm the exact right-angle orientation from the facility traffic plan before fabrication.
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.