STJH-HVAC-DAMPER-ACTUATOR-40NM-FLOATING

HVAC Damper Actuator 40 Nm 24 V High-Torque

High-torque rotary drive for large blades and jackshaft arrangements.

The larger torque output suits mechanically demanding blade banks.
A manual release assists alignment during shaft installation.

Bitte senden Sie eine Anfrage. Browse Produkte

Produkteinführung

The larger gear housing and shaft coupling address dampers whose resistance exceeds the smaller actuator class. A floating three-point command drives the motor in either direction and stops it at the commanded position.

Key Features

The larger torque output suits mechanically demanding blade banks.
A manual release assists alignment during shaft installation.

Technische Parameter

Output Torque	40 Nm
Power Supply	24 V AC/DC
Control Type	Floating three-point; on-off wiring option
Fail-Safe	Non fail-safe
Running Time	150 s per 90 degrees
Rotation	95 degrees
Power During Travel	4 W
Holding Consumption	2 W
Manual Release	External push button
Customisierung	Available for the large-damper shaft and intended control application.

Applications

Large ventilation blade banks
Jackshaft-driven duct dampers

Solutions for Your Application

A small actuator cannot overcome the damper operating torque.

The 40 Nm output provides a higher torque class for the mechanical load.

The controller provides directional contacts rather than an analog signal.

Floating three-point operation accepts separate opening and closing commands.

Verfügbare Optionen

Jackshaft linkage
Shaft extensions
Mounting brackets

Planning a HVAC Damper Actuator 40 Nm 24 V High-Torque specification?

Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.

Sprechen Sie mit unserem Team