Ihr One-Stop - Lieferant für Reinraumausrüstung und Essentials für aseptische EinrichtungenInternationale Projektunterstützung
Open mobile navigationClose mobile navigation
Startseite / Produkte / Cleanroom HVAC Systems / Evaporative Media Humidifier 1200 × 1200 mm Standard
STJH-EVAPORATIVE-MEDIA-HUMIDIFIER-1200X1200

Evaporative Media Humidifier 1200 × 1200 mm Standard

A large 1200 x 1200 mm standard media module rated for about 5.6 m3/s with broad cassette area and stainless support.
  • 1200 x 1200 mm face
  • Approximately 5.6 m3/s airflow
  • Large multi-cassette assembly

Produkteinführung

This largest selected standard face provides four times the area of the 600 mm square module. Rated near 5.6 m3/s, the 1200 x 1200 mm factory section supports central clean-air systems with a high adiabatic humidification or cooling load.

Key Features

Central-system face area

The 1.44 m2 opening distributes high airflow across a broad wetted-media surface.

High adiabatic capacity

More cassette area supports greater water evaporation for large supply-air streams.

Selectable 95% section

The deeper 730 mm arrangement can be chosen where the higher published saturation efficiency is required.

Technische Parameter

Standard Face Size1200 x 1200 mm
Rated Airflow5.6 m3/s / 11900 CFM
MediaGLASdek evaporative cassettes
Section Depth630 mm for 65-85% or 730 mm for 95% efficiency
Support FrameStainless wet-section construction
Water CircuitRecirculating distribution
Air TreatmentDirect adiabatic cooling and humidification
SeparatorDroplet-control option
InstallationLarge central AHU
CustomisierungEfficiency, water management and connection geometry can be configured for the intended application and operating environment.

Applications

Large central clean-air systems, high-volume pharmaceutical AHUs, industrial clean manufacturing and adiabatic precooling.

Solutions for Your Application

Smaller media modules would require parallel frames and complex water headers for the central airflow.Use the single 1200 mm standard face where the 5.6 m3/s rating matches the system.
High water evaporation increases carryover and drainage demand.Select the correct media depth and separator, limit face velocity and provide a fully drainable water section.

Verfügbare Optionen

Efficiency depth, stainless tank, separator, pump redundancy, conductivity control, water treatment, sensors and access provisions are available.

Planning a Evaporative Media Humidifier 1200 × 1200 mm Standard specification?

Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.

Sprechen Sie mit unserem Team
E-Mail uns WhatsApp WeChat

Startseite

Produkte

Neuigkeiten

Über uns

Kontakt