STJH-CARBON-POCKET-FILTER-594X492X300

Activated Carbon Pocket Filter 594 × 492 × 300 mm

A four-pocket intermediate module that adds carbon media area and airflow without requiring a full 594 mm-square rack.

Four carbon pockets
0.50 m3/s rated flow
492 mm intermediate width

Bitte senden Sie eine Anfrage. Browse Produkte

Produkteinführung

The 492 mm-wide model expands the compact carbon-bag format to four pockets and a 0.50 m3/s rated flow while retaining 300 mm pocket depth and 70 Pa initial resistance. It fits intermediate-width retrofit sections where a half module is too small and a full square element is not supported. Pocket inflation and contaminant loading should be checked during commissioning because molecular service life is not indicated by pressure drop alone.

Key Features

Useful retrofit width

The 492 mm face serves legacy or nonstandard AHUs without leaving the excessive bypass space of a 289 mm element.

More active media area

Four pockets increase adsorption surface and airflow capacity over the three-pocket half module.

Constant compact depth

The 300 mm bag projection preserves service-aisle and coil clearance while raising face width.

Technische Parameter

Dimensions	594 x 492 x 300 mm
Pocket Count	4
Rated Airflow	0.50 m3/s
Initial Pressure Drop	70 Pa
Media Type	Impregnated activated-carbon pocket media
Header Depth	22 mm
Filter Geometry	Conical or supported pockets
Primary Duty	Particulate and light molecular filtration
Installation Access	Front or side access
Customisierung	Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung.

Applications

Chosen for intermediate-width air handlers serving laboratories, museum storage, public buildings and clean-support rooms exposed to intermittent odors or low-to-moderate VOCs. It can upgrade an existing bag-filter track when the exact header and clearance match.

Solutions for Your Application

The retrofit opening is neither a half module nor a full 594 mm square.Use the 492 mm four-pocket face after checking actual rack width, retaining clips and gasket contact.

Pockets rub against a downstream obstruction and lose usable media surface.Verify at least 300 mm of clear projection space plus service allowance and observe full pocket inflation at design flow.

Verfügbare Optionen

Select header and gasket details, carbon impregnation, pocket reinforcement, airflow orientation and monitoring or replacement interval.

Planning a Activated Carbon Pocket Filter 594 × 492 × 300 mm specification?

Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.

Sprechen Sie mit unserem Team