Compact acid-control bed
The 240 mm body fits shallow molecular sections and local equipment where the longer cylinder families would conflict with service clearance.
This 148 mm diameter by 240 mm long cartridge is the compact acid-gas member of the cylinder family. Sixteen cylinders populate a 610 x 610 mm opening to provide 1250 m3/h at 80 Pa initial resistance. Its short bed reduces installed depth and media mass relative to the longer 2600- and 3500-class units, making it suitable where space is limited and acid loading is moderate. The impregnated media formulation must be selected for the identified gases, not simply by cartridge length.
The 240 mm body fits shallow molecular sections and local equipment where the longer cylinder families would conflict with service clearance.
A standard 610 mm square bank uses sixteen cartridges, allowing individual elements to be locked into a dedicated frame.
Impregnated adsorbent is selected for the required acid challenge, supporting chemisorption where untreated VOC carbon would be unsuitable.
| Cylinder Dimensions | 148 mm diameter x 240 mm length |
|---|---|
| Rated System Airflow | 1250 m3/h per 16 cylinders |
| Initial Pressure Drop | 80 Pa at rated system airflow |
| Adsorbent | Acid-target impregnated media |
| Cylinder Construction | Corrosion-resistant molded cartridge |
| Cylinders per 610 x 610 mm Opening | 16 |
| Nominal Bed Depth | 25 mm |
| Optimum Relative Humidity | 40-90% RH for acid-media family |
| Optimum Temperature | 10-60 C for acid-media family |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
For compact cleanroom-support supply, recirculation or local corrosion-control equipment exposed to acidic gases. Use a suitable particulate prefilter and confirm the acid species, humidity and required useful life before fixing the cylinder count.
Specify acid species, impregnated media, operating humidity, sixteen-cell frame, access direction, upstream prefilter, monitoring port and planned change interval.
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.