Englisch
Portugiesisch
Spanisch
Malaiisch
indonesisch
DeutschCurrent
Türkischer Sprache
Vietnamesisch
Französisch
Russisch
Arabisch
Thailändisch
Japanisch
Koreanisch
Reinraum HVAC und Luftbehandlung Ausrüstung
Frische Luft Handling Unit
A supply-only air handler that filters and conditions 100% outdoor air before it enters the cleanroom recirculation or supply system.
- 100% Outdoor Air Treatment
- Deep Cooling and Reheat
- Intake Filter Protection
- Cleanroom Pressurization Support
Produkteinführung
A fresh air handling unit treats the full outdoor-air load required for ventilation, process exhaust replacement and building pressurization. Its treatment train normally includes weather intake protection, staged filtration, cooling and dehumidifying coils, reheat and optional humidification. Because outdoor conditions vary widely, coils and valves are selected for peak latent as well as sensible duty. The supply fan modulates to the scheduled ventilation quantity while frost protection and drainable wet sections protect the unit during seasonal operation.
Key Features
Deep cooling followed by controlled reheat separates moisture removal from final supply-air temperature.
Intake screens, dampers and prefilters protect coils from weatherborne debris and particulate loading.
Supply-air volume can track facility exhaust or pressure demand through variable-speed fan control.
Lösungen für Ihre Anwendung
Outdoor air imposes the widest temperature, moisture and contamination range on a cleanroom HVAC system.
Humid summer air raises cleanroom dew point even when room temperature is acceptable.A deep cooling coil removes latent moisture before reheat establishes the required supply temperature.
Exhaust systems pull the cleanroom negative during high process operation.Fan airflow tracks the measured replacement-air or pressure requirement.
Wind-driven rain reaches filters and shortens their service life.A weather louver, drainage section and staged prefiltration protect internal treatment components.
Cold outdoor air freezes the first water coil during low-flow operation.Low-temperature detection, preheat and coordinated damper/fan control protect the coil circuit.
Typische Anwendungen
Cleanroom ventilation-air supplyLaboratory exhaust-air replacementPharmaceutical pressure make-upHospital outside-air treatmentBattery and electronics facilities
Technische Parameter
Typical casing construction for a cleanroom fresh-air handling unit is summarized below.
| Core Material | Closed-cell polyurethane insulation in weather-resistant double-skin panels |
|---|---|
| Panel Dicke | 50–70 mm insulated casing |
| Effektive Breite | 900–3200 mm nominal unit width |
| Maximale Länge | Up to 10000 mm including intake, coil, filter and fan sections |
| Stahl facing Dicke | 0.6–1.0 mm exterior and 0.8–1.0 mm wet-section lining |
| Kerndichte | 40–45 kg/m³ geschlossenzelliges Polyurethan |
| Thermische Leitfähigkeit | 0.022–0.026 W/(m·K) for polyurethane casing insulation |
| Oberfläche Finish | UV-stable powder-coated outer skin with galvanized or stainless cleanable inner skin |
| Gemeinsamer Typ | Gasketed thermal-break frame with weather-sealed intake and modular section joints |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Hot-water, steam or electric preheatChilled-water or DX dehumidifying coilHot-water, electric or heat-pump reheatSteam or high-pressure humidification
Planning a Fresh Air Handling Unit specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
