English
البرتغالية
الإسبانية
اللغة الملاوية
الإندونيسية
الألمانية
اللغة التركية
اللغة الفيتنامية
الفرنسية
الروسية
العربيةالحالي
التايلاندية
اليابانية
الكورية
أنظمة التحكم في الغرف النظيفة والمراقبة البيئية
درجة الحرارة والرطوبة الارسال
A combined wall or duct transmitter that delivers matched temperature and relative-humidity signals from one serviceable sensing assembly.
- Combined T and RH Measurement
- Matched Dual Outputs
- Replaceable Probe Filter
- Local Display Option
مقدمة المنتج
The temperature and humidity transmitter places a stable temperature element and capacitive humidity sensor in the same aspirated probe so both variables represent the same air sample. Internal electronics compensate and linearize the measurements, then provide separate analog signals or a digital network value set. A replaceable filter protects the probe, while an optional display shows temperature, relative humidity and derived dew point locally. Wall, duct and remote-probe configurations address different cleanroom and AHU measurement locations.
الخصائص الرئيسية
Separate calibrated outputs simplify connection to environmental monitoring and HVAC controls.
Replaceable probe filters protect the sensing assembly without replacing the transmitter body.
Optional display presents temperature, RH and derived dew point at the installation location.
حلول للتطبيق الخاص بك
Temperature and humidity values become difficult to interpret when they come from different locations, response times or sensor housings.
Separate sensors report conditions from slightly different air zones.A combined probe measures both variables from one shared air sample.
Humidity drift cannot be distinguished from temperature-driven RH change.Synchronized temperature and RH trends reveal whether moisture content or temperature caused the shift.
Probe contamination requires replacement of the entire transmitter.A serviceable filter and replaceable probe option reduce maintenance scope.
Commissioning staff cannot verify the local reading without a laptop.An optional display provides immediate temperature, humidity and dew-point values.
تطبيقات نموذجية
Cleanroom environmental monitoringAHU supply and return ductsHumidity-controlled storage suitesLaboratory HVAC control
المعلمات الفنية
Typical construction for a combined cleanroom temperature and humidity transmitter is shown below.
| المواد الأساسية | Platinum temperature element and capacitive polymer RH sensor in polycarbonate housing with optional stainless probe |
|---|---|
| سمك اللوحة | 35-60 mm transmitter depth |
| العرض الفعال | 100-150 mm wall housing width |
| الحد الأقصى الطول | Remote or duct probes up to 400 mm |
| الصلب يواجه سمك | 0-0.8 mm; optional 304 stainless probe tube |
| الكثافة الأساسية | 1180-1220 kg/m³ for polycarbonate housing components |
| الموصلية الحرارية | المواد الحاوية المصنوعة من البولي كربونات (m · K) |
| إنهاء السطح | Smooth white housing with black display window and satin stainless probe option |
| نوع المشترك | Wall base or duct flange with removable filtered probe and pluggable output terminals |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Wall, duct or remote probeDual analog outputsModbus or BACnet communicationLocal dew-point display
Planning a Temperature and Humidity Transmitter specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
